III‐V//CuxIn1−yGaySe2 multijunction solar cells with 27.2% efficiency fabricated using modified smart stack technology with Pd nanoparticle array and adhesive material
Authors:
- 16 May 2021
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 29 (8) , 887-898
Abstract
Multijunction (MJ) solar cells achieve high efficiencies by effectively utilizing the solar spectrum. Previously, we have developed III‐V MJ solar cells using smart stack technology, a mechanical stacking technology that uses a Pd nanoparticle array. In this study, we fabricated an InGaP/AlGaAs//CuxIn1−yGaySe2 three‐junction solar cell by applying modified smart stack technology with a Pd nanoparticle array and adhesive material. Using adhesive material (silicone adhesive), the bonding stability was improved conspicuously. The total efficiency achieved was 27.2% under AM 1.5 G solar spectrum illumination, which is a better performance compared to our previous result (24.2%) for a two‐terminal solar cell. The performance was achieved by optimizing the structure of the upper GaAs‐based cell and by using a CuxIn1−yGaySe2 solar cell with a specialized performance for an MJ configuration. In addition, we assessed the reliability of the InGaP/AlGaAs//CuxIn1−yGaySe2 three‐junction solar cell through a heat cycle test (from −40°C to +85°C; 50 cycles) and were able to confirm that our solar cells show high resistivity under severe conditions. The results demonstrate the potential of III‐V//CuxIn1−yGaySe2 MJ solar cells as next‐generation photovoltaic cells for applications such as vehicle‐integrated photovoltaics; they also demonstrate the effectiveness of modified smart stack technology in fabricating MJ cells.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization
- Bundesministerium für Wirtschaft und Energie
This publication has 56 references indexed in Scilit:
- Over 20% Efficiency Mechanically Stacked Multi-Junction Solar Cells Fabricated by Advanced Bonding Using Conductive Nanoparticle AlignmentsMRS Proceedings, 2013
- III-V/Si hybrid photonic devices by direct fusion bondingScientific Reports, 2012
- Multi Junction Solar Cells Stacked with Transparent and Conductive AdhesiveJapanese Journal of Applied Physics, 2011
- A Low-Temperature Bonding Process Using Mixed Cu–Ag NanoparticlesJournal of Electronic Materials, 2010
- Study of Bonding Technology Using Silver NanoparticlesJapanese Journal of Applied Physics, 2008
- Metal–metal bonding process using Ag metallo-organic nanoparticlesActa Materialia, 2005
- Spectral response measurements of monolithic GaInP/Ga(In)As/Ge triple‐junction solar cells: Measurement artifacts and their explanationProgress in Photovoltaics: Research and Applications, 2003
- Fabrication of GaAs/Si Tandem Solar Cell by Epitaxial Lift-Off TechniqueJapanese Journal of Applied Physics, 2003
- Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulationSolar Energy Materials and Solar Cells, 2001
- High efficiency GaAs thin film solar cells by peeled film technologyJournal of Crystal Growth, 1978