Point load testing of weak rocks with particular reference to chalk
Authors:
- 16 May 1998
- journal article
- Published by Geological Society of London in Quarterly Journal of Engineering Geology
- Vol. 31 (2) , 95-103
Abstract
The Point Load Test (PLT) was developed as an index test to predict the Uniaxial Compressive Strength (UCS) of core too broken for UCS testing. A correlation factor ( K ) between UCS and PLT strength of 24 has been proposed although this value is disputed. This paper investigates the value of K for chalk and other weak rocks using published and unpublished data sets and concludes that K is not a unique value even for a single set of specimens but is strength dependent, generally being between 10 and 20 for weaker rock (>25 MPa). It is often less than 10 for rocks of 5 MPa strength or less. Operator error is evaluated and considered to contribute to much of the reported scatter in Point Load Test results. The PLT is considered an appropriate and useful test for predicting the UCS of weak rocks provided that the ISRM methods are strictly observed and that samples with a range of strengths are tested to determine the variation in the correlation factor K with change in strength.Keywords
This publication has 9 references indexed in Scilit:
- Determination of the intact dry density of irregular chalk lumps: a new methodQuarterly Journal of Engineering Geology, 1996
- Evaluation of empirical methods for measuring the uniaxial compressive strength of rockInternational Journal of Rock Mechanics and Mining Sciences, 1990
- Suggested method for determining point load strengthInternational Journal of Rock Mechanics and Mining Sciences, 1985
- The Use of the Point Load Index in Weak Carbonate Rocks1985
- The influence of core sample geometry on the axial point-load testInternational Journal of Rock Mechanics and Mining Sciences, 1983
- Engineering aspects of weathering of low grade metapelites in an arid climatic zoneQuarterly Journal of Engineering Geology, 1982
- Tests of bored and driven piles in Cretaceous mudstone at Port Elizabeth, South AfricaGéotechnique, 1976
- The point-load test in geotechnical practiceEngineering Geology, 1975
- The point-load strength testInternational Journal of Rock Mechanics and Mining Sciences, 1972