Blends of polylactide and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with low content of hydroxyvalerate unit: Morphology, structure, and property
- 29 July 2015
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (42)
Abstract
The Polylactide (PLA)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) blends with four different weight ratios were prepared by melt mixing. PLA and PHBV in PLA/PHBV blends were immiscible while the weak interaction between PLA and PHBV existed. The PHBV domains below 2 μm were dispersed in PLA matrix uniformly. The addition of PHBV made the crystallization of PLA easier due to PHBV acting as nucleating agent. PLA spherulites in PLA/PHBV blends presented various banded structures. In addition, the crystallinity of neat PLA was lower than those of PLA/PHBV blends. With the increase of PHBV content in PLA/PHBV blends, the crystallinity of PLA/PHBV blends increased. PHBV could enhance significantly the toughness of PLA. However, with the increase of PHBV content, the yield stress (σy), tensile modulus (E), and the yield strain (εy) of PLA/PHBV blends decreased gradually. In addition, incorporation of PHBV to PLA caused a transformation from an optical transparent to an opaque system. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42689.Keywords
Funding Information
- National Natural Science Foundation of China (51403084)
- Natural Science Foundation of Jiangsu Province (BK20130142)
- State Key Laboratory of Molecular Engineering of Polymers (Fudan University) (K2015-18)
- the Industrial Support Program of Suqian (H201313)
- the Key Laboratory of Food Colloids and Biotechnology, Ministry of Education, Jiangnan University (JDSJ2013-05)
- the Open Project Program of Key Laboratory of Yarn Forming and Combination Processing Technology of Zhejiang Province (Jiaxing University) (MTC2014-008)
This publication has 28 references indexed in Scilit:
- Miscibility and Phase Morphology of Polylactide/Poly(vinyl acetate-co-vinyl alcohol) Blends Obtained by Melt MixingPolymer-Plastics Technology and Engineering, 2014
- Evolution of concentric spherulites in crystalline-crystalline poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-b-poly(ethylene glycol) copolymersEuropean Polymer Journal, 2013
- Blends of polylactide/thermoplactic elastomer: Miscibility, physical aging and crystallization behaviorsFibers and Polymers, 2013
- Deformation mechanisms in polylactic acid/natural rubber/organoclay bionanocomposites as revealed by synchrotron X-ray scatteringSoft Matter, 2012
- Interfacial Properties, Viscoelasticity, and Thermal Behaviors of Poly(butylene succinate)/Polylactide BlendIndustrial & Engineering Chemistry Research, 2012
- Particular thermal properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) oligomersJournal of Polymer Research, 2011
- Poly(Lactic Acid)2010
- Processing technologies for poly(lactic acid)Progress in Polymer Science, 2008
- Ageing of polylactide and polylactide nanocomposite filamentsPolymer Degradation and Stability, 2008
- Enthalpy Relaxation and Embrittlement of Poly(l-lactide) during Physical AgingMacromolecules, 2007