Determination of Yield Surfaces in Accordance With ISO 16842 Using an Optimized Cruciform Test Specimen
Authors:
Open Access
- 28 May 2020
- journal article
- research article
- Published by Springer Nature in Experimental Mechanics
- Vol. 60 (6) , 815-832
Abstract
Background: For the standard ISO 16842 cruciform test specimen, stresses obtained from the gauge area are far below the ultimate tensile strength due to high stress concentrations at the slit ends which lead to premature failure. Objective: To introduce a new cruciform specimen design which has been optimized with respect to the determination of yield surfaces. Methods: The proposed design differs from the ISO standard by an additional thinning of the gauge area and wider slits in the arms to avoid stress singularities. Compared to other cruciform test piece designs found in the literature, the stress distribution is still homogeneous and there is no need to reduce the size of the gauge area, thanks to the specimen’s well-balanced proportions. Results: Biaxial tensile tests have been conducted with aluminium 5754 alloy samples of different thicknesses. For the standard cruciform test piece, the maximum strain achieved at the gauge area is only 25% of the fracture strain. The optimized cruciform test piece can attain about 66% of the fracture strain before breaking. Conclusions: The optimized specimen design enables the measurement of yield surfaces at higher stress levels. In case of other materials such as elastomers, the slit length has be to adjusted accordingly.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (INST 898/26-1 FUGG)
This publication has 26 references indexed in Scilit:
- Formability analysis of sheet metals by cruciform testingJournal of Physics: Conference Series, 2017
- Stresses and Strains in Cruciform Samples Deformed in TensionExperimental Mechanics, 2017
- Insights into Cruciform Sample DesignJOM, 2017
- Optimal Cruciform Specimen Design Using the Direct Multi-search Method and Design Variable Influence StudyProcedia Structural Integrity, 2017
- Identification of strain rate-dependent mechanical behaviour of DP600 under in-plane biaxial loadingsMaterials Science and Engineering: A, 2016
- Optimization of cruciform specimens for biaxial fatigue loading with direct multi searchTheoretical and Applied Fracture Mechanics, 2015
- Numerical verification of a biaxial tensile test method using a cruciform specimenJournal of Materials Processing Technology, 2013
- Use of abrupt strain path change for determining subsequent yield surface: experimental study with metal sheetsActa Materialia, 2000
- Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tensionJournal of Materials Processing Technology, 1998
- Stoffdehnung und Formänderung der Hülle von Prall-Luftschiffen1913