Optimal Design of a Modular Series Parallel Resonant Converter for a Solid State 2.88 MW/115-kV Long Pulse Modulator
Authors:
- 11 July 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 42 (10) , 3014-3022
Abstract
Modern accelerator driven experiments like linear colliders or spallation sources are supplied by RF amplifiers using klystrons. The cathode voltage for these klystrons can be generated by long pulse modulators generating highly accurate voltage pulses in the length of milliseconds. Conventional designs using pulse transformers become huge for long pulses. The series-parallel resonant converter (SPRC) topology avoids this drawback as the transformer is operating at high frequencies. This paper presents a comprehensive design approach for SPRC modules, which is based on an optimization procedure containing an electrical model of the resonant circuit and a thermal model of the semiconductors. In addition, an insulation and a leakage design procedure and a thermal model of the transformer are also presented. Finally, this procedure provides the optimal design parameters of the resonant circuit elements. With these parameters, a global optimizer chooses the optimum amount of modules connected in series and/or in parallel to fulfill the given restrictions. The efficiency of a basic SPRC-module is 94.7% with a pulsed power density of 4.63 kW/l.Keywords
Funding Information
- Ampegon AG, Turgi, Switzerland, through the CTI-Research Project (13135.1 PFFLR-IW)
This publication has 7 references indexed in Scilit:
- Analytical model for the thermal resistance of windings consisting of solid or litz wire2013
- Pulsed Voltage Droop Compensation for Solid State Marx Modulator2008
- A High Power Dynamically Flexible Pulse Width Radar Modulator2007
- Combination of thermal subsystems modeled by rapid circuit transformation2007
- A Long Pulse Modulator For Reduced Size And Cost2005
- A novel RC model of capacitive-loaded parallel and series-parallel resonant DC-DC converters2002
- A Charge Simulation Method for the Calculation of High Voltage FieldsIEEE Transactions on Power Apparatus and Systems, 1974