Progressive collapse resisting capacity of braced frames
Authors:
- 2 March 2011
- journal article
- research article
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 20 (2) , 257-270
Abstract
In this study, the progressive collapse potential of braced frames was investigated using nonlinear static and dynamic analyses. Eight different bracing types were considered and their performances were compared with those of a special moment‐resisting frame designed with the same design load. According to the pushdown analysis results, most braced frames designed per current design codes satisfied the design guidelines for progressive collapse initiated by loss of a first story interior column; however, most model structures showed brittle failure mode caused by buckling of braces and columns. Among the braced frames considered, the inverted‐V type braced frames showed superior ductile behaviour during progressive collapse. The nonlinear dynamic analysis results showed that all the braced structures remained in stable condition after sudden removal of a column, and their deflections were less than that of the moment‐resisting frame. Copyright © 2009 John Wiley & Sons, Ltd.Keywords
This publication has 11 references indexed in Scilit:
- Progressive Collapse-Resisting Capacity of Steel Moment Frames considering Panel Zone DeformationAdvances in Structural Engineering, 2009
- Progressive collapse analysis of seismically designed steel braced framesJournal of Constructional Steel Research, 2009
- Development of integrated system for progressive collapse analysis of building structures considering dynamic effectsAdvances in Engineering Software, 2009
- Evaluation of progressive collapse potential of steel moment frames considering catenary actionThe Structural Design of Tall and Special Buildings, 2008
- Design of steel moment frames considering progressive collapseSteel and Composite Structures, 2008
- Collapse Behavior of Steel Special Moment Resisting Frame ConnectionsJournal of Structural Engineering, 2007
- Inelastic Cyclic Testing of Welded Unreinforced Moment ConnectionsJournal of Structural Engineering, 2002
- Experimental Evaluation of Cyclically Loaded Reduced Beam Section Moment ConnectionsJournal of Structural Engineering, 2002
- Inelastic seismic response of steel bracing membersJournal of Constructional Steel Research, 2002
- Seismic Behavior of Concentrically Braced FrameJournal of Structural Engineering, 1989