Significant Capacity and Cycle‐Life Improvement of Lithium‐Ion Batteries through Ultrathin Conductive Film Stabilized Cathode Particles
- 21 April 2015
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 2 (8) , 1500046
Abstract
Atomic layer deposition (ALD), as a thin film deposition technique, has been explored as a viable path to improve the performance of lithium‐ion batteries. However, a trade‐off between the species transport (capacity) and protection (lifetime), resulting from the insulating properties of ALD films, is the key challenge in ALD technology. Here we report a breakthrough to overcome this trade‐off by coating an ultrathin conformal cerium dioxide (CeO2) film on the surfaces of LiMn2O4 particles. The optimized CeO2 film (≈3 nm) coated particles exhibit a significant improvement in capacity and cycling performance compared to uncoated (UC), Al2O3 coated, and ZrO2 coated samples at room temperature and 55 °C for long cycling numbers. The initial capacity of the 3 nm CeO2‐coated sample shows 24% increment compared to the capacity of the uncoated one, and 96% and 95% of the initial capacity is retained after 1000 cycles with 1C rate at room temperature and 55 °C, respectively. The detailed electrochemical data reveal that the suppression of the impedance rise and the facile transport of the species are the main contributors to the success.Keywords
This publication has 46 references indexed in Scilit:
- Role of surface coating on cathode materials for lithium-ion batteriesJournal of Materials Chemistry, 2010
- Enhanced Stability of LiCoO[sub 2] Cathodes in Lithium-Ion Batteries Using Surface Modification by Atomic Layer DepositionJournal of the Electrochemical Society, 2010
- Atomic Layer Deposition: An OverviewChemical Reviews, 2009
- Atmospheric Pressure Process for Coating Particles Using Atomic Layer DepositionChemical Vapor Deposition, 2009
- Microstructure of LiCoO2 with and without “AlPO4” Nanoparticle Coating: Combined STEM and XPS StudiesChemistry of Materials, 2007
- Studies of LiCoO[sub 2] Coated with Metal OxidesElectrochemical and Solid-State Letters, 2003
- Synthesis and Electrochemical Properties of ZnO-Coated LiNi[sub 0.5]Mn[sub 1.5]O[sub 4] Spinel as 5 V Cathode Material for Lithium Secondary BatteriesElectrochemical and Solid-State Letters, 2002
- Reducing Carbon in LiFePO[sub 4]/C Composite Electrodes to Maximize Specific Energy, Volumetric Energy, and Tap DensityJournal of the Electrochemical Society, 2002
- Novel LiCoO2 Cathode Material with Al2O3 Coating for a Li Ion CellChemistry of Materials, 2000
- Atomic layer epitaxyThin Solid Films, 1992