Optimizing 3D printing performance of acrylonitrile‐butadiene‐styrene composites with cellulose nanocrystals/silica nanohybrids
- 12 April 2019
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 68 (7) , 1351-1360
Abstract
The preparation of 3D printed products with excellent comprehensive performance is still receiving much attention. Cellulose, the most abundant and green natural polymer, was used in this study to fabricate polymeric composites used for 3D printing. Specifically, novel cellulose nanocrystals/silica nanohybrids (CSNs) were synthesized via the sol–gel method using cellulose nanocrystals (CNCs) obtained by hydrolysis of sulfuric acid as raw materials, and the thermostability was significantly improved due to the adsorption of silica (SiO2) on the surface of the CNCs via hydrogen bonding and covalent bonds. Subsequently, the CSNs were used in fused deposition modeling (FDM) with acrylonitrile‐butadiene‐styrene (ABS) as the matrix. Unlike ABS/CNC product which shows obvious yellowing, the ABS/CSN product shows a smooth undefiled surface, demonstrating their excellent applicability to high temperature FDM molding. Further, the effect of different silane coupling agents on the mechanical properties was compared and organically modified CSNs (oCSNs) were prepared using KH570 to optimize the dispersion of the filler and the interaction with the matrix. Satisfactorily, the addition of organically modified oCSNs not only does not degrade the fluidity but it also eliminates the warpage of FDM products and improves both layer adhesion and mechanical properties. This study provides a pioneering strategy for the thermal processing applications of CNCs and the modification of FDM products. © 2019 Society of Chemical IndustryKeywords
This publication has 46 references indexed in Scilit:
- Cellulose derivatives and graft copolymers as blocks for functional materialsPolymer International, 2013
- Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose NanocrystalsACS Applied Materials & Interfaces, 2012
- Additive manufacturing of tissues and organsProgress in Polymer Science, 2012
- Organic–Inorganic Hybrid Silica Membranes with Controlled Silica Network Size for Propylene/Propane SeparationIndustrial & Engineering Chemistry Research, 2011
- Cellulose nanomaterials review: structure, properties and nanocompositesChemical Society Reviews, 2011
- Acrylic Nanocomposite Resins for Use in Stereolithography and Structural Light Modulation Based Rapid Prototyping and Rapid Manufacturing TechnologiesAdvanced Functional Materials, 2008
- Novel SiO2/cellulose nanocomposites obtained by in situ synthesis and via polyelectrolytes assemblyComposites Science and Technology, 2008
- Synthesis and characterisation of cellulose/silica hybrids obtained by heteropoly acid catalysed sol–gel processMaterials Science and Engineering: C, 2007
- Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysisCellulose, 2006
- Short fiber reinforced composites for fused deposition modelingMaterials Science and Engineering: A, 2001