Improving the thermal stability of polysulfidic crosslinks by hexamethylene‐1, 6‐bis (thiosulfate) disodium salt as the curing agent of natural rubber
Authors:
- 18 April 2023
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 29 (3) , 545-554
Abstract
When vulcanized with sulfur, the natural rubber (NR) usually accompanies reversion, and the proportion of polysulfidic crosslinks decreases considerably, leading to significantly performance decay. In the rubber industry, hexamethylene‐1, 6‐bis(thiosulfate) disodium salt (HTS) is used as a multifunctional agent to improve not only the reversion and fatigue properties of NR, but also the adhesive properties between NR and steel cords. However, there is few research about the working mechanism of HTS. In this work, HTS is added to belt compounds in doses of 0 to 5 phr. The cure characteristics, crosslinking structures, physical‐mechanical properties, dynamic viscoelastic behavior, and T‐pull adhesion forces of the NR composites are investigated. The results show that the total crosslinking density and T‐pull adhesion forces of the composites both pass through a maximum and then decrease with the increasing dosage of HTS. Meanwhile, the formation of hybrid crosslinks during the prolonged cure time enhances the thermal stability and retention of the polysulfidic crosslinks of the NR composites. Surprisingly, the reduction in the proportion of polysulfidic crosslinks from optimum cure time (Tc 90 ) to 60 min just reaches 15.9% with the addition of 5 phr HTS, whereas that value is 30.9% without adding HTS, which shows the excellent antireversion ability of the HTS in the belt compound. Our work reveals some new features of HTS, which can lead to a more profound understanding of HTS.Keywords
Funding Information
- Natural Science Foundation of Guangdong Province (2020A1515010988)
- South China University of Technology
This publication has 23 references indexed in Scilit:
- Three-dimensional hMSC motility within peptide-functionalized PEG-based hydrogels of varying adhesivity and crosslinking densityActa Biomaterialia, 2013
- Rubber Vulcanizates Degradation and StabilizationRubber Chemistry and Technology, 2007
- Mechanical properties of deproteinized natural rubber in comparison with synthetic cis‐1, 4 polyisoprene vulcanizates: Gum and black‐filled vulcanizatesJournal of Applied Polymer Science, 2005
- Chemistry of the vulcanization and protection of elastomers: A review of the achievementsJournal of Applied Polymer Science, 2002
- Carbasulfanes as Crosslinker for Dienerubber — A Model Compound StudyRubber Chemistry and Technology, 2001
- Reversion Stable Networks with Polysulfide Polymers as Vulcanization AgentsRubber Chemistry and Technology, 2001
- Occurrence and Prevention of Changes in the Chemical Structure of Natural Rubber Tire Tread Vulcanizates during ServiceRubber Chemistry and Technology, 1970
- Displacements and Nuclear Substitutions on HydroxypyrazinesJournal of the American Chemical Society, 1956
- Determination of degree of crosslinking in natural rubber vulcanizates. Part IJournal of Polymer Science, 1956
- Tensile Strength in Relation to Molecular Weight of High PolymersJournal of the American Chemical Society, 1945