A relation for accelerating deformation of sandy soil and its application to predict the time to failure of a sandy model slope under repeated rainfall
Open Access
- 25 March 2022
- journal article
- research article
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 81 (7) , 1-12
Abstract
The measurement of groundwater level and surface displacement in a sandy model slope under repeated rainfall was conducted to examine the effect of repeated pore pressure loading and unloading on the slope deformation. The velocity increased with small fluctuation even immediately before failure. Positive and negative accelerations occurred due to fluctuations in the velocity. The velocity increased with a considerable rise in the groundwater level and approached its ultimate value immediately before failure. The surface displacement increased not only with the rise in the groundwater level but also with the fall of the groundwater level and under a constant groundwater level. The relationships between the velocity and the absolute value of the acceleration derived from the surface displacement were linear on a logarithmic scale and unique for each stage with increasing and decreasing velocities due to the rise and lowering in the groundwater level. While the relationship was different during the stage of creep during failure. The relationship had been recognized to be applicable only during an increase in velocity; in this paper, a new relationship was established for any velocity trend and the method for predicting the time of failure was proposed based on the relationship between the velocity and acceleration. The time remaining to failure, which was defined as the difference between the predicted failure time and present time, could approach zero at the actual failure time when the constant α in the equation was greater than 1.4, and the determining factor in regression analysis for deriving the constant was high under different periods of measurement before the final event. The time remaining to failure approaching zero might be an indicator for predicting failure time.Keywords
Funding Information
- Japan Society for the Promotion of Science (Grant-in-Aid for Scientific Research B -KAKENHI-, 18H01674)
This publication has 14 references indexed in Scilit:
- Shear and compression strain development in sandy model slope under repeated rainfallSoils and Foundations, 2017
- An accelerating precursor to predict “time-to-failure” in creep and volcanic eruptionsJournal of Volcanology and Geothermal Research, 2017
- Improvement of Fukuzono’s Model for Time Prediction of an Onset of a Rainfall-Induced Landslide2017
- A relation to predict the failure of materials and potential application to volcanic eruptions and landslidesScientific Reports, 2016
- Monitoring and early warning of the 2012 Preonzo catastrophic rockslope failureLandslides, 2016
- New insights into the temporal prediction of landslides by a terrestrial SAR interferometry monitoring case studyLandslides, 2014
- Design and implementation of a landslide early warning systemEngineering Geology, 2012
- Inverted S-shaped model for nonlinear fatigue damage of rockInternational Journal of Rock Mechanics and Mining Sciences, 2009
- Failure forecast for large rock slides by surface displacement measurementsCanadian Geotechnical Journal, 2003
- A Relation to Describe Rate-Dependent Material FailureScience, 1989