Application of the microbond technique: Characterization of carbon fiber‐epoxy interfaces
Authors:
- 1 September 1991
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 31 (17) , 1250-1256
Abstract
Microbonding has been applied to measure the interfacial shear strength, τ, between single carbon fiber and microdroplets of epoxy resins. The effect of thermoset cure and resin modification on this initial parameter for composite performance have been studied. The interfacial shear strength for the host fiber/epoxy system (T‐300/Epos 828) increased 3 fold from a B‐stage to a fully cured material. The addition of a toughening agent called “Fortifier P” to the host resin system increased T by 40%. Residual thermal stresses were calculated and their contribution to mechanical adhesion were related to friction components.Keywords
This publication has 19 references indexed in Scilit:
- High‐performance thermoplastic toughened BMI matrix system. II. Interface studyJournal of Applied Polymer Science, 1990
- Interfacial debonding and fiber pull-out stresses of fiber-reinforced compositesMaterials Science and Engineering: A, 1990
- A Critical Evaluation of the Use of the Microbond Method for Determination of Composite Interfacial PropertiesMRS Proceedings, 1989
- Interpretation of Experimental Results in the Single Pull-out Filament TestJournal of Composites Technology and Research, 1989
- Adhesion between polybutylene terephthalate and E‐glass. Measured with a microdebond techniquePolymer Composites, 1988
- Some effects of surface‐controlled reactions of Kevlar 29 on the interface in epoxy compositesPolymer Composites, 1988
- A microbond method for determination of the shear strength of a fiber/resin interfaceComposites Science and Technology, 1987
- Improved epoxy‐amine matrices for compositesPolymer Composites, 1986
- An additive for increasing the strength and modulus of amine-cured epoxy resinsJournal of Applied Polymer Science, 1984
- Fortifiers for epoxy‐amine systemsBritish Polymer Journal, 1983