Study on Performance of 8YSZ Thick Gradient TBC
Authors:
- 1 July 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 607, 43-46
Abstract
Plasma spray zirconia gradient thermal barrier coating (TBC) and the traditional double-layer structure thermal barrier coating were both studied in this paper. NiCoCrAlY alloy powder was used as bottom bonding materials, 8YSZ (8mol% yttrium stabilized zirconia) was used as top layer materials and the different proportions mixed powder of 8YSZ and NiCoCrAlY was used as gradient layers materials. Bonding strength of thickness gradient coating was measured by tensile experiment. Thermal cycle experiment was carried on to test the thermal shock resistance of TBC. The microstructure after thermal shock experiment was observed to analyze the failure mechanism of TBC. The research result shows that the bonding strength and thermal shock resistance of gradient TBC are much better than the traditional double-layer structure TBC. With the increasing of top layer thickness, thermal shock life of TBC substantially reduces. With the decreasing of ZrO2 composition proportion in gradient layer, thermal shock life of TBC significantly rises. This result has important significance for the future study of thick TBC.Keywords
This publication has 6 references indexed in Scilit:
- Thermal cycling resistance of modified thick thermal barrier coatingsSurface and Coatings Technology, 2005
- Highly durable thermal barrier coatings made by the solution precursor plasma spray processSurface and Coatings Technology, 2004
- Correlations between processing parameters and microstructure for YSZ films produced by plasma spray techniqueJournal of the European Ceramic Society, 2004
- Low friction coatings prepared by high performance type spray gunSurface and Coatings Technology, 2003
- Correlations between microstructural parameters, micromechanical properties and wear resistance of plasma sprayed ceramic coatingsWear, 2001
- Development of YBCO coatings by atmospheric plasma sprayingJournal of the European Ceramic Society, 2000