Fabrication and Properties of Thermoplastic Polyurethane/Silver Parts via Fused Deposition Modeling for Electromagnetic Interference Shielding and Wearable Sensors
- 29 December 2021
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (7)
Abstract
With the rapid development of high technology, there is an urgent requirement for multifunctional and flexible intelligent devices. Herein, the segregated thermoplastic polyurethane/silver (TPU/Ag) composite with continuous silver structure were fabricated by a jealous combination of fused deposition modeling (FDM) and selective microwave sintering (SMS). The SMS process significantly improves the mechanical performance of the parts, mainly attributed to the enhanced interfacial bonding strength between heated filaments. Benefiting from the high flexibility and continuous segregated Ag structure of the printed parts, the TPU/Ag composites with 2.34 mm of thickness can achieve an excellent electromagnetic interference shielding effectiveness (EMI SE) of average ≈78.3 dB in X‐band (8.2–12.4 GHz). In addition, the elastic characteristic of the printed parts enabling a prominent stretchable sensitivity under repeated tensile mode. The sensors exhibit high‐sensitive performance (GF = 1900.6 at strain of 9%) and can monitor subtle human activity. The facile and green strategy proposed in this study is highly favorable for the fabrication of functional 3D printed parts with enhanced mechanical strength for the applications of portable electronic devices and wearable smart sensors.Keywords
Funding Information
- National Natural Science Foundation of China (52163007)
This publication has 60 references indexed in Scilit:
- Ultrathin carbon foams for effective electromagnetic interference shieldingCarbon, 2016
- Highly Stretchable and Ultrasensitive Strain Sensor Based on Reduced Graphene Oxide Microtubes–Elastomer CompositeACS Applied Materials & Interfaces, 2015
- Ultrasensitive mechanical crack-based sensor inspired by the spider sensory systemNature, 2014
- Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain SensorsAdvanced Materials, 2013
- Shape memory polymer/CNT composites and their microwave induced shape memory behaviorsRSC Advances, 2013
- Facile Preparation of Lightweight Microcellular Polyetherimide/Graphene Composite Foams for Electromagnetic Interference ShieldingACS Applied Materials & Interfaces, 2013
- Surface Silverized Meta-Aramid Fibers Prepared by Bio-inspired Poly(dopamine) FunctionalizationACS Applied Materials & Interfaces, 2013
- Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineeringJournal of Tissue Engineering and Regenerative Medicine, 2012
- Comparison of electrical properties between multi-walled carbon nanotube and graphene nanosheet/high density polyethylene composites with a segregated network structureCarbon, 2011
- Microwave versus conventional sintering: A review of fundamentals, advantages and applicationsJournal of Alloys and Compounds, 2010