Optimizing bone cement stiffness for vertebroplasty through biomechanical effects analysis based on patient-specific three-dimensional finite element modeling
- 28 May 2018
- journal article
- research article
- Published by Springer Nature in Medical & Biological Engineering & Computing
- Vol. 56 (11) , 2137-2150
Abstract
Vertebroplasty is a common and effective treatment for symptomatic osteoporotic vertebral compression fractures. However, the cemented and adjacent vertebras have a risk of recollapse due to largely unassured mechanisms, among which excessive stiffness of bone cement may be an important risk factor. This study aimed to find the most appropriate range of bone cement stiffness by analyzing its biomechanical effects on the augmented and adjacent vertebras of individual patient after vertebroplasty. A three-dimensional finite element model of T11-L1 osteoligamentous vertebras was reconstructed according to individual computed tomography data and validated by post mortem human subject experiment in literatures. Bone cement of varying stiffness was injected into the trabecular core of the T12 vertebra simulatively. The maximum von Mises stresses on cancellous and cortical bones of T11-L1 vertebras were analyzed under the loading conditions of flexion, extension, bending, and torsion. For the adjacent T11 and L1 vertebras, the stepwise elevation of the bone cement elastic modulus increased the maximum von Mises stress on the cancellous bone, but its effect on cortical bone was negligible. For the augmented T12 vertebra, the stresses on cancellous bone increased slightly under the loading condition of lateral bending and remained no impact on cortical bone. The linear interpolation revealed that the most suitable range of cement elastic modulus is 833.1 and 1408.1 Mpa for this patient. Increased elastic modulus of bone cement may lead to a growing risk of recollapse for the cemented vertebra as well as the adjacent vertebras. Our study provides a fresh perspective in clinical optimization of individual therapy in vertebroplasty.Keywords
Funding Information
- The New Xiangya Talent Project of the Third Xiangya Hospital of Central South University (JY201502)
This publication has 67 references indexed in Scilit:
- Effect of Bone Cement Volume and Stiffness on Occurrences of Adjacent Vertebral Fractures after VertebroplastyJournal of Korean Neurosurgical Society, 2012
- Risk factors predicting the new symptomatic vertebral compression fractures after percutaneous vertebroplasty or kyphoplastyEuropean Spine Journal, 2011
- Lumbar interbody fusion: a parametric investigation of a novel cage design with and without posterior instrumentationEuropean Spine Journal, 2011
- Correlative Factor Analysis on the Complications Resulting From Cement Leakage After Percutaneous Kyphoplasty in the Treatment of Osteoporotic Vertebral Compression FractureJournal of Spinal Disorders & Techniques, 2010
- Biomechanical comparison of a new stand-alone anterior lumbar interbody fusion cage with established fixation techniques – a three-dimensional finite element analysisBMC Musculoskeletal Disorders, 2008
- Refractures in cemented vertebrae after percutaneous vertebroplasty: a retrospective analysisEuropean Spine Journal, 2008
- Adjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cementEuropean Spine Journal, 2007
- Material Changes in Osteoporotic Human Cancellous Bone Following Infiltration with Acrylic Bone Cement for a Vertebral Cement AugmentationComputer Methods in Biomechanics and Biomedical Engineering, 2003
- Percutaneous transpedicular vertebroplasty with PMMA: operative technique and early resultsEuropean Spine Journal, 2000
- Direct and computed tomography thickness measurements of the human, lumbar vertebral shell and endplateBone, 1994