Ultimate Control of Rate-Dependent Adhesion for Reversible Transfer Process via a Thin Elastomeric Layer
Authors:
- 30 March 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (14) , 12886-12892
Abstract
Adhesion between a stamp with an elastomeric layer and various devices or substrates is crucial to successfully fabricate flexible electronics using a transfer process. Although various transfer processes using stamps with different adhesion strengths have been suggested, the controllable range of adhesion is still limited to a narrow range. To precisely transfer devices onto selected substrates, however, the difference in adhesion between the picking and placing processes should be large enough to achieve a high yield. Herein, we report a simple way to extend the controllable adhesion range of stamps, which can be achieved by adjusting the thickness of the elastomeric layer and the separation velocity. The adhesion strength increased with decreasing layer thickness on the stamp due to a magnification of the confinement and rate-dependent effects on the adhesion. This enabled the controllable range of the adhesion strength for a 15 μm-thick elastomeric layer to be extended up to 12 times that of the bulk under the same separation conditions. The strategy of designing stamps using simple adhesion tests is also introduced, and the reversible transfer of thin Si chips was successfully demonstrated. Tuning and optimizing the adhesion strength of a stamp according to the design process suggested here can be applied to various materials for the selective transfer and replacement of individual devices.Keywords
Funding Information
- Korea Institute of Machinery and Materials (SC1240)
- Ministry of Science, ICT and Future Planning (2014063700, 2014063701)
This publication has 27 references indexed in Scilit:
- Skin-inspired organic electronic materials and devicesMRS Bulletin, 2016
- Materials for Flexible, Stretchable Electronics: Graphene and 2D MaterialsAnnual Review of Materials Research, 2015
- Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice FabricationAdvanced Materials, 2012
- Flexible Electronics: The Next Ubiquitous PlatformProceedings of the IEEE, 2012
- Kinetically controlled, adhesiveless transfer printing using microstructured stampsApplied Physics Letters, 2009
- Contact Mechanics of UV/Ozone-Treated PDMS by AFM and JKR Testing: Mechanical Performance from Nano- to Micrometer Length ScalesMacromolecules, 2008
- Semiconductor Wires and Ribbons for High‐ Performance Flexible ElectronicsAngewandte Chemie International Edition, 2008
- Transfer printing by kinetic control of adhesion to an elastomeric stampNature Materials, 2005
- Masterless Soft Lithography: Patterning UV/Ozone−Induced Adhesion on Poly(dimethylsiloxane) SurfacesLangmuir, 2005
- Investigation of microcontact transfer of proteins from a selectively plasma treated elastomer stamp by fluorescence microscopy and force microscopyThe Analyst, 2001