Leakage current and common mode voltage issues in modern AC drive systems
- 1 December 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
Due to rapid developments of IGBT technology, switching time and frequency are dramatically increased. At higher carrier frequencies, IGBTs induce more capacitive coupled current into a rotor and a stator frame and lead to faster bearing damage. Common mode voltage enables motor to create shaft voltage through electrostatic couplings between the rotor and the stator windings and between the rotor and the frame, and it can caused bearing currents when the shaft voltage exceeds a breakdown voltage level of the bearing grease. Also, high frequency leakage current occurs through stray capacitors between stator winding and the motor frame due to a high rate of the common mode dv/dt at motor terminals which can produce induced shaft voltage. Conducted and radiated Electromagnetic Interference (EMI) emissions are major problems in recent motor drives that produce undesirable effects on electronic devices. In modern power electronic systems, increasing power density and decreasing cost and size of system are market requirements. Switching losses, Harmonics and EMI are the key factors which should be considered at the beginning stage of a design to optimise a drive system. In most of power electronic designs, EMI issues have not been taken into account as one of the main factors; and mitigation techniques for EMI are considered at the last stage of design. This paper presents main EMI issues in a modern AC drive system.Keywords
This publication has 85 references indexed in Scilit:
- A new common-mode sinusoidal inverter output filter2003
- An inverter/motor drive with common mode voltage elimination2002
- Common-mode voltage reduction method modifying the distribution of zero-voltage vector in PWM converter/inverter systemIEEE Transactions on Industry Applications, 2001
- Suppression of common-mode voltage in a PWM rectifier/inverter system2001
- Common mode current attenuation techniques for use with PWM drivesIEEE Transactions on Power Electronics, 2001
- New random inverter control techniquefor commonmode voltage mitigation of motor drivesIEE Proceedings - Electric Power Applications, 1999
- Reduction of common-mode currents in PWM inverter motor drivesIEEE Transactions on Industry Applications, 1999
- An improved inverter output filter configuration reduces common and differential modes dv/dt at the motor terminals in PWM drive systemsIEEE Transactions on Power Electronics, 1998
- An active circuit for cancellation of common-mode voltage generated by a PWM inverterIEEE Transactions on Power Electronics, 1998
- Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systemsIEEE Transactions on Industry Applications, 1996