Implementation of a Large-Area Diffractive Lens Using Multiple Sub-Aperture Diffractive Lenses and Computational Reconstruction
Authors:
- Shivasubramanian GopinathSGShivasubramanian Gopinath
- Praveen Periysamy AngamuthuPraveen Periysamy Angamuthu
- Tauno KahroTKTauno Kahro
- Andrei BleahuABAndrei Bleahu
- Francis Gracy ArockiarajFAFrancis Gracy Arockiaraj
- Daniel SmithDSDaniel Smith
- Soon Hock NgSNSoon Hock Ng
- Saulius JuodkazisSaulius Juodkazis
- Kaupo KukliKKKaupo Kukli
- Aile TammATAile Tamm
- Vijayakumar AnandVijayakumar Anand
Open Access
Abstract
Direct imaging systems that create an image of an object directly on the sensor in a single step are prone to many constraints, as a perfect image is required to be recorded within this step. In designing high resolution direct imaging systems with a diffractive lens, the outermost zone width either reaches the lithography limit or the diffraction limit itself, imposing challenges in fabrication. However, if the imaging mode is switched to an indirect one consisting of multiple steps to complete imaging, then different possibilities open. One such method is the widely used indirect imaging method with Golay configuration telescopes. In this study, a Golay-like configuration has been adapted to realize a large-area diffractive lens with three sub-aperture diffractive lenses. The sub-aperture diffractive lenses are not required to collect light and focus them to a single point as in a direct imaging system, but to focus independently on different points within the sensor area. This approach of a Large-Area Diffractive lens with Integrated Sub-Apertures (LADISA) relaxes the fabrication constraints and allows the sub-aperture diffractive elements to have a larger outermost zone width and a smaller area. The diffractive sub-apertures were manufactured using photolithography. The fabricated diffractive element was implemented in indirect imaging mode using non-linear reconstruction and the Lucy–Richardson–Rosen algorithm with synthesized point spread functions. The computational optical experiments revealed improved optical and computational imaging resolutions compared to previous studies.Keywords
All Related Versions
Funding Information
- European Union’s Horizon 2020 Research and Innovation Programme (857627 (CIPHR), LP190100505, TK134, PRG4)
- ARC Linkage (857627 (CIPHR), LP190100505, TK134, PRG4)
- European Regional Development Fund project “Emerging orders in quantum and nanomaterials” (857627 (CIPHR), LP190100505, TK134, PRG4)
- Estonian Research Agency (857627 (CIPHR), LP190100505, TK134, PRG4)
This publication has 47 references indexed in Scilit:
- Non-scanning motionless fluorescence three-dimensional holographic microscopyNature Photonics, 2008
- On-axis conoscopic holography without a conjugate imageOptics Letters, 1992
- Conoscopic holography I Basic principles and physical basisJournal of the Optical Society of America A, 1992
- Phase-only matched filteringApplied Optics, 1984
- Coded aperture imaging with uniformly redundant arraysApplied Optics, 1978
- An iterative technique for the rectification of observed distributionsThe Astronomical Journal, 1974
- Bayesian-Based Iterative Method of Image Restoration*Journal of the Optical Society of America, 1972
- Point Arrays Having Compact, Nonredundant AutocorrelationsJournal of the Optical Society of America, 1971
- Scatter-Hole Cameras for X-Rays and Gamma RaysThe Astrophysical Journal, 1968
- Rotational–Shearing InterferometryApplied Optics, 1966