The effect of processing conditions on the rheological properties of blends of ultra high molecular weight polyethylene with high‐density polyethylene
- 5 December 2018
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 59 (4) , 821-829
Abstract
Blends of high‐density polyethylene (HDPE) with small amounts of ultra‐high molecular weight polyethylene (UHMWPE) were prepared by melt mixing in a twin‐screw microcompounder. Two types of UHMWPE differing in their states of chain entanglement were used. The blend composition, time of mixing, and rotation speed of the screws were varied. Rheological properties of the blends were studied in oscillatory shear and uniaxial elongational tests. Reduction in phase angle measured in dynamic shear rheology and increase in extensional strain hardening were found to be useful indicators for quantifying the extent of mixing of the two components. Although the disentangled UHMWPE showed reasonable mixing with HDPE during typical residence times of melt compounding operations, the entangled UHMWPE remained essentially undissolved. The extent of mixing increased with mixing time and screw speed. POLYM. ENG. SCI., 59:821–829, 2019. © 2018 Society of Plastics EngineersKeywords
Funding Information
- Reliance Industries Ltd
This publication has 50 references indexed in Scilit:
- Controlling Polyolefin Properties by In‐Reactor Blending: 2. Particle DesignMacromolecular Reaction Engineering, 2012
- Effect of Electromagnetic Vibration on the Rheological Properties of HDPE/UHMWPE Blends and the Properties of the Blown FilmsAdvanced Materials Research, 2012
- Heterogeneous Distribution of Entanglements in the Polymer Melt and Its Influence on CrystallizationMacromolecules, 2007
- Formation of Entanglements in Initially Disentangled Polymer MeltsMacromolecules, 2006
- A comparative study of multimodal vs. bimodal polyethylene pipe resins for PE‐100 applicationsPolymer Engineering & Science, 2005
- The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processingPolymer Engineering & Science, 1987
- Effects of mixing on morphology, rheology, and mechanical properties of blends of ultra‐high molecular weight polyethylene with linear low‐density polyethylenePolymer Engineering & Science, 1987
- Cocrystallization and miscibility studies of blends of ultrahigh molecular weight polyethylene with conventional polyethylenesJournal of Applied Polymer Science, 1986
- Thermal, mechanical, and rheological behavior of blends of ultrahigh and normal‐molecular‐weight linear polyethylenesPolymer Engineering & Science, 1983
- Explanation for the 3.4‐power law for viscosity of polymeric liquids on the basis of the tube modelJournal of Polymer Science: Polymer Physics Edition, 1983