Hot Deformation and Dynamic Recrystallization Behavior of CoCrNi and (CoCrNi)94Ti3Al3 Medium Entropy Alloys
Open Access
Abstract
The CoCrNi and precipitate-hardened (CoCrNi)94Ti3Al3 medium entropy alloys (MEAs) have attracted much attention, due to their exceptional mechanical properties, whereas the hot deformation characteristics have not been revealed. In the present study, we investigated the dynamic recrystallization behavior and microstructure evolutions of the two MEAs hot-compressed at single-phase temperatures. The constitutive equation was obtained, and microstructures were observed. Discontinuous dynamic recrystallization acted as a key mechanism of grain refinement at a relatively higher temperature and lower strain rate, which leads to the formation of a homogeneous grain structure. The addition of Ti and Al promoted dynamic recrystallization due to the solid solution hardening effect. The results provide valuable guidelines for microstructure refinement via thermomechanical processing.Keywords
Funding Information
- National Natural Science Foundation of China (51674079)
- China Postdoctoral Science Foundation (2016M600211)
- Grant-in-Aid for Scientific Research from the Japan Society for the Promotion of Science (JSPS) KAKENHI (No. 19K14838)
- Core Research Cluster of Materials Science Fusion Research project, Tohoku University (No. J190002727)
This publication has 38 references indexed in Scilit:
- The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloyActa Materialia, 2013
- Tensile properties of high- and medium-entropy alloysIntermetallics, 2013
- Strain-induced grain evolution in an austenitic stainless steel under warm multiple forgingMaterials Science and Engineering: A, 2013
- Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloyJournal of Materials Science, 2012
- A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr–1Mo (P91) steelMaterials Science and Engineering: A, 2011
- Dynamic recrystallization mechanisms operating in a Ni–20%Cr alloy under hot-to-warm workingActa Materialia, 2010
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60Acta Materialia, 2001
- Hot WorkabilityInternational Materials Reviews, 1972
- On the mechanism of hot deformationActa Metallurgica, 1966