ZnO@ZIF-8 Core-Shell Structure Gas Sensors with Excellent Selectivity to H2
Open Access
Abstract
As the energy crisis becomes worse, hydrogen as a clean energy source is more and more widely used in industrial production and people’s daily life. However, there are hidden dangers in hydrogen storage and transportation, because of its flammable and explosive features. Gas detection is the key to solving this problem. High quality sensors with more practical and commercial value must be able to accurately detect target gases in the environment. Emerging porous metal-organic framework (MOF) materials can effectively improve the selectivity of sensors as a result of high surface area and coordinated pore structure. The application of MOFs for surface modification to improve the selectivity and sensitivity of metal oxides sensors to hydrogen has been widely investigated. However, the influence of MOF modified film thickness on the selectivity of hydrogen sensors is seldom studied. Moreover, the mechanism of the selectivity improvement of the sensors with MOF modified film is still unclear. In this paper, we prepared nano-sized ZnO particles by a homogeneous precipitation method. ZnO nanoparticle (NP) gas sensors were prepared by screen printing technology. Then a dense ZIF-8 film was grown on the surface of the gas sensor by hydrothermal synthesis. The morphology, the composition of the elements and the characters of the product were analyzed by X-ray diffraction analysis (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Brunauer-Emmett-Teller (BET) and differential scanning calorimetry (DSC). It is found that the ZIF-8 film grown for 4 h cannot form a dense core-shell structure. The thickness of ZIF-8 reaches 130 nm at 20 h. Through the detection and analysis of hydrogen (1000 ppm), ethanol (100 ppm) and acetone (50 ppm) from 150 °C to 290 °C, it is found that the response of the ZnO@ZIF-8 sensors to hydrogen has been significantly improved, while the response to ethanol and acetone was decreased. By comparing the change of the response coefficient, when the thickness of ZIF-8 is 130 nm, the gas sensor has a significantly improved selectivity to hydrogen at 230 °C. The continuous increase of the thickness tends to inhibit selectivity. The mechanism of selectivity improvement of the sensors with different thickness of the ZIF-8 films is discussed.Keywords
Funding Information
- National Museum of Nature and Science (NO.61771207)
- Hubei Provincial Science and Technology Project (2019AEE019)
This publication has 44 references indexed in Scilit:
- Safety criteria for the transport of hydrogen in permanently mounted composite pressure vesselsInternational Journal of Hydrogen Energy, 2021
- Dispersion and behavior of hydrogen for the safety design of hydrogen production plant attached with nuclear power plantInternational Journal of Hydrogen Energy, 2020
- Metal-organic frameworks for QCM-based gas sensors: A reviewSensors and Actuators A: Physical, 2020
- Waste-to-energy nexus for circular economy and environmental protection: Recent trends in hydrogen energyScience of The Total Environment, 2020
- Hydrogen Energy Production from Advanced Reforming Processes and Emerging ApproachesChemical Engineering & Technology, 2020
- Energy-environmental efficiency of clean energy in China: Integrated analysis with regional green growthJournal of Renewable and Sustainable Energy, 2020
- A perspective on hydrogen energy research, development and innovation activities in TurkeyInternational Journal of Energy Research, 2019
- Metal oxide hydrogen, oxygen, and carbon monoxide sensors for hydrogen setups and cellsInternational Journal of Hydrogen Energy, 2007
- Development of Dissolved Hydrogen Sensors Based on Yttria‐Stabilized Zirconia Solid Electrolyte with Noble Metal ElectrodesJournal of the Electrochemical Society, 1997
- The principles of the detection of flammable atmospheres by catalytic devicesCombustion and Flame, 1973