Molybdenum as a Gate Electrode for Deep Sub-Micron CMOS Technology
Authors:
- 1 January 2000
- journal article
- Published by Springer Nature in MRS Proceedings
- Vol. 611
Abstract
Molybdenum has several properties that make it attractive as a CMOS gate electrode material. The high melting point (∼2610°C) and low coefficient of thermal expansion (5×10−6/°C, at 20 °C) are well suited to withstand the thermal processing budgets normally encountered in a CMOS fabrication process. Mo is among the most conductive refractory metals and provides a significant reduction in gate resistance as compared with doped polysilicon. Mo is also stable in contact with SiO2 at elevated temperatures. In order to minimize short-channel effects in bulk CMOS devices, the gate electrodes must have work functions that correspond to Ec (NMOS) and Ev (PMOS) in Si. This would normally require the use of two metals with work functions differing by about 1V on the same wafer and introduce complexities associated with selective deposition and/or etching. In this paper, the dependence of the work function of Mo on deposition and annealing conditions is investigated. Preliminary results indicate that the work function of Mo can be varied over the range of 4.0-5.0V by a combination of suitable post-deposition implantation and annealing schemes. Mo is thus a promising candidate to replace polysilicon gates in deep sub-micron CMOS technology. Processing sequences which might allow the work function of Mo to be stabilized on either end of the Si energy band gap are explored.Keywords
This publication has 7 references indexed in Scilit:
- Structural Evolution of Sputtered Molybdenum Thin Film GrowthMaterials Transactions, JIM, 1998
- Optimum Electrode Materials for Ta2O5 Capacitors for High- and Low-Temperature ProcessesJapanese Journal of Applied Physics, 1994
- Thermodynamic considerations in refractory metal-silicon-oxygen systemsJournal of Applied Physics, 1984
- Hydrogen Gettering Effect of Mo2 N / Mo MOS ProcessJournal of the Electrochemical Society, 1983
- Mo2N/Mo gate MOSFET'sIEEE Transactions on Electron Devices, 1983
- Refractory metal gate processes for VLSI applicationsIEEE Transactions on Electron Devices, 1979
- Vacuum Thermionic Work Functions of Polycrystalline Nb, Mo, Ta, W, Re, Os, and IrJournal of Applied Physics, 1966