Evaluation of the hydrothermal aging effect on the buckling behavior of hybrid glass/aramid/epoxy composite plates: Comparison of distilled water and seawater
- 30 April 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (7) , 4463-4477
Abstract
This study aims to investigate the hydrothermal effect on the buckling behavior of glass/aramid/epoxy hybrid composites under distilled and seawater environments. The four types of composite groups ([G 6 ] S , [A 6 ] S , [G 3 A 3 ] S , [A 3 G 3 ] S ) produced by vacuum infusion method were immersed in distilled and seawater at 25 and 70°C for 1000 h. The buckling test was carried out for dry, wet, and redried conditions. The periodic measurements showed that as temperature increases, the maximum water gain ratios also increase for all composite groups. Furthermore, the water absorption parameters were affected by the type of fluids. The buckling test results showed that both temperature and fluid type are effective on the critical buckling load of specimens. The increase in the critical buckling load of the hybrid samples tested in the redried state was less than the samples tested in the wet state for both temperatures. Moreover, the critical buckling loads of the composites aged in seawater were higher than the composites aged in distilled water.Keywords
Funding Information
- Gaziantep Üniversitesi (MF.DT.19.08)
This publication has 35 references indexed in Scilit:
- Investigation of the long term effects of moisture on carbon fibre and epoxy matrix compositesComposites Science and Technology, 2012
- Effects of seawater immersion on water absorption and mechanical properties of GFRP compositesJournal of Composite Materials, 2012
- Low velocity impact properties of 3D woven basalt/aramid hybrid compositesComposites Science and Technology, 2008
- Buckling Characteristics of Symmetrically and Antisymmetrically Laminated Composite Plates with Central CutoutApplied Composite Materials, 2007
- Durability evaluation of moderate temperature cured E-glass/vinylester systemsComposite Structures, 2004
- The effect of water immersion ageing on low-velocity impact behaviour of woven aramid–glass fibre/epoxy compositesComposites Science and Technology, 2004
- Axial Loading and Buckling Response Characteristics of Pultruded Hybrid Glass-Graphite/Epoxy Composite BeamsJournal of Reinforced Plastics and Composites, 2003
- Stability of laminated composite plates with cut-outsComputers & Structures, 1992
- Vibration and buckling of hybrid laminated curved panelsComposite Structures, 1992
- Moisture Absorption and Desorption of Composite MaterialsJournal of Composite Materials, 1976