Fabrication of Graded Nickel–Alumina Composites with a Thermal‐Behavior‐Matching Process
Authors:
- 1 September 2000
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 83 (9) , 2147-2154
Abstract
Composites of nickel and Al 2 O 3 with compositionally graded microstructures were fabricated from powders through an empirically determined thermal‐behavior‐matching process that was designed to minimize processing‐induced stresses. Compositions ranged from pure Al 2 O 3 to pure nickel. Specimen geometries included round disks 25 mm in diameter and 5–25 mm thick, as well as rectangular bars 25 mm × 25 mm in cross section and 75 mm long. Several different gradients were produced, including samples with single interlayers. Compacts were formed by cold uniaxial pressing in a die, followed by consolidation through sintering at 1 atm or hot isostatic pressing. Several different particle sizes of nickel and Al 2 O 3 comprised the composite interlayers. The compaction behavior, sintering start temperature, sintering rate, and total linear shrinkage of each composition were evaluated. Careful data analysis, coupled with sintering theory, led to a layer configuration with matched green density and sintering behavior. Thermomechanically matched layers allowed large, crack‐free, graded composites to be produced.Keywords
This publication has 25 references indexed in Scilit:
- Pressureless Sintering of Al2O3/Ni NanocompositesJournal of the European Ceramic Society, 1999
- Fabrication of 3Y-TZP/SUS304 functionally graded materials by slip casting; application of porous alumina moldsMaterials Letters, 1998
- Design and microstructure of ZrO2/SUS316 functionally graded materials by tape castingMaterials Letters, 1998
- Optimization of 316 stainless steel/alumina functionally graded material for reduction of damage induced by thermal residual stressesMaterials Science and Engineering: A, 1998
- Processing, Deformation, and Fracture of Ni-Al2O3 Composites with and Without Graded MicrostructuresCeramic Engineering and Science Proceedings, 1998
- Al2O3/Y-TZP continuous functionally graded ceramics by filtration-sedimentationJournal of the European Ceramic Society, 1997
- Functionally graded ceramic/ceramic and metal/ceramic composites by electrophoretic depositionComposites Part B: Engineering, 1997
- Fabrication and microstructure of ZrO2/NiCrCoAlY graded coating by plasma sprayingSurface and Coatings Technology, 1997
- Erosion studies on duplex and graded ceramic overlay coatingsJOM, 1996
- Fabrication of zirconia-alumina functionally gradient material by superplastic diffusion bondingJournal of Materials Science, 1993