Replication and characterization of the compound eye of a fruit fly for imaging purpose
- 6 October 2014
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 105 (14) , 143705
Abstract
In this work, we report the replication and characterization of the compound eye of a fruit fly for imaging purpose. In the replication, soft lithography method was employed to replicate the compound eye of a fruit fly into a UV-curable polymer. The method was demonstrated to be effective and the compound eye is replicated into the polymer (NOA78) where each ommatidium has a diameter of about 30 μm and a sag height of about 7 μm. To characterize its optical property, the point spread function of the compound eye was tested and a NA of 0.386 has been obtained for the replicated polymeric ommatidium. Comparing with the NA of a real fruit fly ommatidium which was measured to be about 0.212, the replicated polymeric ommatidium has a much larger NA due to the refractive index of NOA78 is much higher than that of the material used to form the real fruit fly ommatidium. Furthermore, the replicated compound eye was used to image a photomask patterned with grating structures to test its imaging property. It is shown that the grating with a line width of 20 μm can be clearly imaged. The image of the grating formed by the replicated compound eye was shrunk by about 10 times and therefore a line width of about 2.2 μm in the image plane has been obtained, which is close to the diffraction limited resolution calculated through the measured NA. In summary, the replication method demonstrated is effective and the replicated compound eye has the great potential in optical imaging.Keywords
Funding Information
- Jilin Provincial Science and Technology Department of China (20116013 and 20140519002JH, 2010DFR10660)
- National Natural Science Foundation of China (61475156, 61361166004, 90923036 and 60977041)
This publication has 21 references indexed in Scilit:
- Miniature curved artificial compound eyesProceedings of the National Academy of Sciences, 2013
- Digital cameras with designs inspired by the arthropod eyeNature, 2013
- Applications of chirped microlens arrays for aberration compensation and improved system integration2006
- Biologically Inspired Artificial Compound EyesScience, 2006
- Miniaturized imaging systemsMicroelectronic Engineering, 2003
- Replica molding using polymeric materials: A practical step toward nanomanufacturingAdvanced Materials, 1997
- Design and analysis of apposition compound eye optical sensorsOptical Engineering, 1995
- From insect vision to robot visionPhilosophical Transactions of the Royal Society B: Biological Sciences, 1992
- The evolution of visual processing and the construction of seeing systemsProceedings of the Royal Society of London. B. Biological Sciences, 1987
- Acuity of compound eyes: Physical limitations and designJournal of Comparative Physiology A, 1977