In situ leading-edge-induced damages of melting and cracking W/Cu monoblocks as divertor target during long-term operations in EAST
Authors:
- Rui DingRDRui Ding
- Yang LeiYLYang Lei
- the EAST TeamTTthe EAST Team
- 15 March 2022
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 62 (5) , 056004
Abstract
The leading-edge-induced thermal loading effect due to assembly tolerance between neighboring castellated plasma-facing components is a critical issue in fusion devices. Actively cooled ITER-like W/Cu monoblocks were successfully installed for the upper divertor target in EAST which significantly increases the performance of the divertor power exhaust. The misalignment between neighboring monoblocks was formed inevitably during manufacturing and assembly processes, providing a possibility to demonstrate the leading-edge-induced thermal damage. Indeed, the leading-edge-induced melting phenomena of W/Cu monoblocks on upper divertor targets were observed using CCD a camera during plasma discharges with a large number of droplets ejected from the divertor target, which were also identified at the leading edges of W/Cu monoblocks. Not only that, but also many macro cracks with widths of ∼70 μm and depths of −2 on flat top surface with large misalignment up to 3 mm at the leading edges. Meanwhile, the high temperature also induced high thermal stress and strain concentration at the center of leading edges, at which thermal fatigue cracking could be initially generated. Such type of cracks at leading edges on W/Cu monoblocks may be unavoidable due to long-term, pulsed fatigue effects. However, the influence of these cracks seems to be acceptable thanks to the limited propagated distance due to the self-castellation effect, which still needs long-term tracking. The in situ leading-edge-induced melting and cracking damage on W/Cu monoblocks of the EAST upper divertor target provides significant insight on understand the leading-edge-induced thermal effect in ITER and future fusion devices.Keywords
Funding Information
- Key Research Program of Frontier Sciences, CAS (ZDBS-LY-SLH010)
- Collaborative Innovation Program of Hefei Science Center, CAS (2020HSC-CIP004)
- National Natural Science Foundation of China (11675218)
- National Key R&D Program of China (2017YFA0402500)
- CASHIPS Director’s Fund (BJPY2019B01)
This publication has 40 references indexed in Scilit:
- Status of technology R&D for the ITER tungsten divertor monoblockJournal of Nuclear Materials, 2015
- Theoretical investigation of crack formation in tungsten after heat loadsJournal of Nuclear Materials, 2015
- ELM-induced transient tungsten melting in the JET divertorNuclear Fusion, 2015
- Numerical evaluation of heat flux and surface temperature on a misaligned JET divertor W lamella during ELMsNuclear Fusion, 2014
- Plasma facing components for the Experimental Advanced Superconducting Tokamak and CFETRPhysica Scripta, 2014
- The WEST project: PFC shaping solutions investigated for the ITER-like W divertorFusion Engineering and Design, 2013
- Analysis of structural changes and high-heat-flux tests on pre-damaged tungsten from tokamak melt experimentsPhysica Scripta, 2011
- Numerical simulation of the combined effects of plasma heating and neutron heating loads on the ITER first wallFusion Engineering and Design, 2011
- Progress in technology and experiment of superconducting tokamaks in ASIPPFusion Engineering and Design, 2010
- ITER material properties handbookJournal of Nuclear Materials, 1996