Dual polarized active frequency selective surface for high power applications at X-band
Authors:
- 1 June 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 372-375
Abstract
An active frequency selective surface (AFSS) with switchable transmissive/reflective properties at X-band frequencies is introduced. This surface achieves a unique combination of maintaining a high dynamic range between active states, demonstrating an insensitivity to incoming orthogonal linear polarizations, and operating across a 10% bandwidth at X-band frequencies. This is achieved through a novel implementation of PIN diodes as short-circuit boundary conditions across a “window frame” aperture pattern that produces either constructive or destructive resonance depending on the biasing state of the diodes. The DC biasing structure maintains element symmetry while mitigating inter-element coupling, allowing adjacent FSS cells to be connected in series without distorting their resonance or limiting the polarization response of the surface. The AFSS has a measured reflective-state isolation of greater than 17 dB and transmissive-state loss of less than 1 dB across an operating band of 9 to 10 GHz. We believe this combination of performance and versatility at X-band to be unique in the literature, and is implemented here in such a way as to make this AFSS suitable for future high power applications.Keywords
This publication has 7 references indexed in Scilit:
- Polarization-Insensitive Single- and Broadband Switchable Absorber/Reflector and Its Realization Using a Novel Biasing TechniqueIEEE Transactions on Antennas and Propagation, 2016
- Active absorption/transmission FSS using diodes2015
- Reconfigurable antenna using novel active frequency selective surface2014
- Dual Polarized Reconfigurable Frequency Selective SurfacesIEEE Transactions on Antennas and Propagation, 2013
- A Beam Steering Horn Antenna Using Active Frequency Selective SurfaceIEEE Transactions on Antennas and Propagation, 2013
- Laser machined microsystems for active frequency selective surfaces2012
- Switchable Frequency Selective Surface for Reconfigurable Electromagnetic Architecture of BuildingsIEEE Transactions on Antennas and Propagation, 2009