A Validation Study on Mechanical Properties of Foam Concrete with Coarse Aggregate Using ANN Model
Open Access
Abstract
The usage of foam concrete (FC) was extended from being used as a filler material to an alternative concrete due to the effect of conventional concrete on global warming. The diversified perspective on FC as an alternative to conventional concrete is due to its low density (400–1800 kg/m3) and good thermal conductivity, which also results in the reduction of costs in production, labor, and transportation. Generally, FC is produced by adding a pre-made foam to the cement slurry consisting of cement and aggregates. Here, the study was carried out by the addition of a coarse aggregate and foaming agent (i.e., 12%, 6%, 3%, 2%, 1%) at varying percentages in FC to improve the strength characteristics. FC was tested for its physical and mechanical properties. From the experimental results, an Artificial Neural Network (ANN) was developed to predict the strength of FC. The results from training and testing of the Polynomial Regression Analysis model (PRA) through ANN have shown great potential in predicting compression, split tensile, and flexural strength of FC. It was found that the strength of FC is increased with the reduction of foam volume and increase in coarse aggregate volume. However, a strength of 25.6 N/mm2 is achieved when 1% foam and 50% coarse aggregate is used.Keywords
This publication has 39 references indexed in Scilit:
- Cellular concrete properties and the effect of synthetic and protein foaming agentsConstruction and Building Materials, 2013
- Prediction of the concrete compressive strength by means of core testing using GMDH-type neural network and ANFIS modelsComputational Materials Science, 2012
- Prediction of the strength of mineral admixture concrete using multivariable regression analysis and an artificial neural networkExpert Systems with Applications, 2011
- A comparison of model selection methods for compressive strength prediction of high-performance concrete using neural networksComputers & Structures, 2010
- Factorial design used to model the compressive strength of mortars containing recycled rubberComposite Structures, 2010
- A classification of studies on properties of foam concreteCement and Concrete Composites, 2009
- The modeling of mode choices of intercity freight transportation with the artificial neural networks and adaptive neuro-fuzzy inference systemExpert Systems with Applications, 2009
- Prediction of compressive strength of concrete containing fly ash using artificial neural networks and fuzzy logicComputational Materials Science, 2008
- Influence of filler type on the properties of foam concreteCement and Concrete Composites, 2006
- Preliminary views on the potential of foamed concrete as a structural materialMagazine of Concrete Research, 2005