Experimental Study on the Performance of Steel-Fiber-Reinforced Concrete for Remote-Pumping Construction
Open Access
Abstract
Remote-pumped concrete for infrastructure construction is a key innovation of the mechanized and intelligent construction technology. This has brought steel-fiber-reinforced concrete (SFRC) into undergoing various developments, from conventional flowability to high pumpability with low-carbon features. In this regard, an experimental study on the mixing proportion design and the pumpability and mechanical properties of SFRC was conducted for remote pumping. Using the absolute volume method based on the steel-fiber-aggregate skeleton packing test, the water dosage and the sand ratio were adjusted with an experimental study on reference concrete with the premise of varying the volume fraction of steel fiber from 0.4% to 1.2%. The test results of the pumpability of fresh SFRC indicated that the pressure bleeding rate and the static segregation rate were not the controlling indices due to the fact that they were far below the limits of the specifications, and the slump flowability fitted for remote-pumping construction was verified by a lab pumping test. Although the rheological properties of the SFRC charactered by the yield stress and the plastic viscosity increased with the volume fraction of steel fiber, those of mortar used as a lubricating layer during the pumping was almost constant. The cubic compressive strength of the SFRC had a tendency to increase with the volume fraction of steel fiber. The reinforcement effect of steel fiber on the splitting tensile strength of the SFRC was similar to the specifications, while its effect on the flexural strength was higher than the specifications due to the special feature of steel fibers distributed along the longitudinal direction of the beam specimens. The SFRC had excellent impact resistance with an increased volume fraction of steel fiber and presented acceptable water impermeability.Keywords
Funding Information
- Introduced International Intelligence Project of Henan, China (GJRC2018HS02)
This publication has 18 references indexed in Scilit:
- Mix Proportion Design of Self-Compacting SFRC with Manufactured Sand Based on the Steel Fiber Aggregate Skeleton Packing TestMaterials, 2020
- Shrinkage and Mechanical Properties of Self-Compacting SFRC With Calcium-Sulfoaluminate Expansive AgentMaterials, 2020
- Statistical Analysis and Preliminary Study on the Mix Proportion Design of Self-Compacting Steel Fiber Reinforced ConcreteMaterials, 2019
- Numerical Analysis of Mix Proportion of Self-Compacting Concrete Compared to Ordinary ConcreteKey Engineering Materials, 2018
- An experimental study on strength and toughness of steel fiber reinforced expanded-shale lightweight concreteConstruction and Building Materials, 2018
- Effects of different deformed steel-fibers on preparation and fundamental properties of self-compacting SFRCConstruction and Building Materials, 2018
- Effects of flowability on SFRC fibre distribution and propertiesMagazine of Concrete Research, 2017
- Discussion of Mix Proportions of Concrete for Long-Distance PumpingKey Engineering Materials, 2017
- Effect of the coarse aggregate size on pipe flow of pumped concreteConstruction and Building Materials, 2014
- Lubrication layer properties during concrete pumpingCement and Concrete Research, 2013