A two‐mechanism soil–structure interface model for three‐dimensional cyclic loading
- 27 July 2020
- journal article
- research article
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 44 (15) , 2042-2069
Abstract
Summary: A three‐dimensional (3D) soil–structure interface model is proposed within the two‐mechanism constitutive theory and bounding surface theory originally established for soils. The proposed model has two main characteristics: first, the model is formulated based on two different and superposed deformation mechanisms. The first mechanism is due to the stress ratio increment, and the second is due to the normal stress increment. Each mechanism induces a shear strain component and a normal strain component. The proposed model can be reduced to the conventional single‐mechanism interface model. Second, the plastic modulus and stress dilatancy are defined using the bounding surface theory. The plastic flow rule under cyclic loading is modified and assumed to be dependent on both the stress state of the mapping point and the stress reversal loading direction. The proposed model was validated against the available 3D interface tests and was found to satisfactorily reflect the salient features of the interfaces under monotonic and cyclic loading paths with different normal boundaries. The problem in which the elastic normal stiffness in conventional single‐mechanism interface models is often underestimated to enhance the simulation performance under varying normal stress conditions is solved by incorporating the second mechanism. And the effect of the second mechanism on the modeling behavior is discussed. The modified plastic flow direction accurately simulates the 3D cyclic shear response, and the difference between the model simulation and test result increases with the number of cycles by use of the plastic flow direction defined in conventional bounding surface theory.Keywords
Funding Information
- National Natural Science Foundation of China (51890912, U1965206, 51779034)
This publication has 45 references indexed in Scilit:
- Numerical simulation of the separation between concrete face slabs and cushion layer of Zipingpu dam during the Wenchuan earthquakeScience China Technological Sciences, 2015
- Numerical modeling of soil–structure interface of a concrete-faced rockfill damComputers and Geotechnics, 2009
- Monotonic and Cyclic Tests of Interface between Structure and Gravelly SoilSoils and Foundations, 2006
- Cyclic Testing and Constitutive Modeling of Saturated Sand–Concrete Interfaces Using the Disturbed State ConceptInternational Journal of Geomechanics, 2005
- Pile Skin Friction in Sands from Constant Normal Stiffness TestsGeotechnical Testing Journal, 1995
- Mechanisms of Shaft Friction in Sand from Instrumented Pile TestsJournal of Geotechnical Engineering, 1993
- Analysis and Implementation of Thin‐Layer Element for Interfaces and JointsJournal of Engineering Mechanics, 1992
- Frictional Resistance at Yield between Dry Sand and Mild SteelSoils and Foundations, 1986
- Thin‐layer element for interfaces and jointsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1984
- A Model for the Mechanics of Jointed RockJournal of the Soil Mechanics and Foundations Division, 1968