Identification of Intermetallic Phases Limiting the Growth of Austenite Grains in the Low-Pressure Carburizing Process
Open Access
Abstract
This article presents the results of a study to identify intermetallic phases whose role is to limit austenite grain growth in the low-pressure carburizing process. A drawback of high-temperature low-pressure carburizing is the austenite grain growth during the process. Using low-pressure carburizing with pre-nitriding technology (PreNitLPC®) offers the possibility of reducing austenite grain growth. This technology involves the application of doses of ammonia during the heating stage of the steel, at the carburizing temperature, to introduce nitrogen into the surface layer of the steel and to form nitrides. It is these phases that cause restrictions on austenite grain growth during carburizing. The research carried out in this article was aimed at identifying these phases. The research was carried out on one of the basic steels used for carburizing—16MnCr5 steel. The carburizing of this steel with and without pre-nitriding was performed, followed by an evaluation of the austenite grain size after these processes and the identification of the intermetallic phases present in the surface layer of the steel.Keywords
This publication has 30 references indexed in Scilit:
- Properties of Surface Layers Processed by a New, High-Temperature Vacuum Carburizing Technology with Prenitriding - PreNitLPC®Advanced Materials Research, 2012
- Grain growth behavior of coarse-grained austenite in a Nb–V–Ti microalloyed steelMaterials Science and Engineering: A, 2009
- Influence of niobium microalloying on rotating bending fatigue properties of case carburized steelsMaterials Science and Engineering: A, 2008
- The Effects of Heating Rate on Austenite Grain Growth in a Ti-modified SAE 8620 Steel with Controlled Niobium AdditionsISIJ International, 2007
- The Influence of Niobium Microalloying on Austenite Grain Coarsening Behavior of Ti-modified SAE 8620 SteelISIJ International, 2007
- Austenite Grain Stability of Titanium-Modified Carburizing SteelSolid State Phenomena, 2006
- New developments in thermo-chemical diffusion processesSurface and Coatings Technology, 2005
- New Microalloyed Steel Applications for the Automotive SectorMaterials Science Forum, 2005
- Austenite Grain Coarsening Under the Influence of Niobium CarbonitridesMATERIALS TRANSACTIONS, 2004
- Austenite Grain Growth Behaviour of Microalloyed Al-V-N and Al-V-Ti-N Steels.ISIJ International, 1998