Design and Optimization of the Internal Cooling Channels of a High Pressure Turbine Blade—Part I: Methodology
- 13 January 2010
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 132 (2) , 021013
Abstract
This first paper describes the conjugate heat transfer (CHT) method and its application to the performance and lifetime prediction of a high pressure turbine blade operating at a very high inlet temperature. It is the analysis tool for the aerothermal optimization described in a second paper. The CHT method uses three separate solvers: a Navier–Stokes solver to predict the nonadiabatic external flow and heat flux, a finite element analysis (FEA) to compute the heat conduction and stress within the solid, and a 1D aerothermal model based on friction and heat transfer correlations for smooth and rib-roughened cooling channels. Special attention is given to the boundary conditions linking these solvers and to the stability of the complete CHT calculation procedure. The Larson–Miller parameter model is used to determine the creep-to-rupture failure lifetime of the blade. This model requires both the temperature and thermal stress inside the blade, calculated by the CHT and FEA. The CHT method is validated on two test cases: a gas turbine rotor blade without cooling and one with five cooling channels evenly distributed along the camber line. The metal temperature and thermal stress distribution in both blades are presented and the impact of the cooling channel geometry on lifetime is discussed.Keywords
This publication has 18 references indexed in Scilit:
- Design and Optimization of the Internal Cooling Channels of a High Pressure Turbine Blade—Part II: OptimizationJournal of Turbomachinery, 2010
- A comparison of conjugate heat transfer methods applied to an axial helium turbineProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2007
- Creep deformation and rupture behaviour of directionally solidified GTD 111 superalloyFatigue & Fracture of Engineering Materials & Structures, 2006
- Numerical Study of the Heat Transfer in Micro Gas TurbinesJournal of Turbomachinery, 2006
- Prediction of turbulent flow and heat transfer within rotating U‐shaped passagesHeat Transfer, 2006
- Detached eddy simulation of flow and heat transfer in fully developed rotating internal cooling channel with normal ribsInternational Journal of Heat and Fluid Flow, 2006
- Comparison of Turbine Tip Leakage Flow for Flat Tip and Squealer Tip Geometries at High-Speed ConditionsJournal of Turbomachinery, 2004
- Heat transfer research on gas turbine airfoils at NASA GRCInternational Journal of Heat and Fluid Flow, 2002
- A Study of Convective Heat Transfer in a Model Rotor–Stator Disk CavityJournal of Turbomachinery, 2001
- Viscous Analysis of Three-Dimensional Rotor Flow Using a Multigrid MethodJournal of Turbomachinery, 1994