Enhancing the Mechanical Performance of Glass Fiber‐Reinforced Polymer Composites using Multi‐Walled Carbon Nanotubes
Authors:
- 19 May 2020
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (8)
Abstract
Herein, the effects of multi‐walled carbon nanotubes (MWCNTs) on the mechanical performance of glass fiber‐reinforced polymer composites (GFRPs) are investigated, and the optimized MWCNT content is obtained through a series of experiments. MWCNTs are deposited on unidirectional glass fiber cloths using a solution dip coating method. The original fiber cloths and fiber cloths deposited with MWCNTs are used to manufacture GFRPs using a vacuum‐assisted resin injection process. The GFRP specimens are then synthesized to characterize the tension, bending, interlaminar shear strength, and mode‐II fracture toughness by uniaxial tension, three‐point bending, short beam shear, and end notch flexural tests. The results confirm that the mechanical performance of the original GFRPs increases with the addition of MWCNTs, and GFRPs with an MWCNT content of 0.3 wt% exhibit better comprehensive mechanical properties. Scanning electron microscopy is used to analyze the damage mechanism of the broken specimens with and without MWCNT modification.Keywords
This publication has 33 references indexed in Scilit:
- Tensile behavior of epoxy based FRP composites under extreme service conditionsComposites Part B: Engineering, 2012
- A strategy for improving mechanical properties of a fiber reinforced epoxy composite using functionalized carbon nanotubesComposites Science and Technology, 2011
- Carbon Nanotubes: Synthesis, Properties, and ApplicationsParticulate Science and Technology, 2009
- Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based compositesEngineering Fracture Mechanics, 2008
- Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubesComposites Part A: Applied Science and Manufacturing, 2008
- Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strengthComposites Science and Technology, 2007
- Mechanical properties improvements in two-phase and three-phase composites using carbon nano-fiber dispersed resinComposites Part A: Applied Science and Manufacturing, 2005
- Advances in the science and technology of carbon nanotubes and their composites: a reviewComposites Science and Technology, 2001
- Opening carbon nanotubes with oxygen and implications for fillingNature, 1993
- Helical microtubules of graphitic carbonNature, 1991