Steam Gasification of Lignite in a Bench-Scale Fluidized-Bed Gasifier Using Olivine as Bed Material
Open Access
- 23 April 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (8) , 2931
Abstract
The gasification of lignite could be a promising sustainable alternative to combustion, because it causes reduced emissions and allows the production of syngas, which is a versatile gaseous fuel that can be used for cogeneration, Fischer-Tropsch synthesis, or the synthesis of other bio-fuels, such as methanol. For the safe and smooth exploitation of syngas, it is fundamental to have a high quality gas, with a high content of H2 and CO and minimum content of pollutants, such as particulate and tars. In this work, experimental tests on lignite gasification are carried out in a bench-scale fluidized-bed reactor with olivine as bed material, chosen for its catalytic properties that can enhance tar reduction. Some operating parameters were changed throughout the tests, in order to study their influence on the quality of the syngas produced, and pressure fluctuation signals were acquired to evaluate the fluidization quality and diagnose correlated sintering or the agglomeration of bed particles. The effect of temperature and small air injections in the freeboard were investigated and evaluated in terms of the conversion efficiencies, gas composition, and tar produced.Keywords
Funding Information
- Research Fund for Coal and Steel (796585)
This publication has 37 references indexed in Scilit:
- Modelling of tar formation and evolution for biomass gasification: A reviewApplied Energy, 2013
- Phase transformation characterization of olivine subjected to high temperature in airCeramics International, 2013
- Workability and strength of lignite bottom ash geopolymer mortarJournal of Hazardous Materials, 2009
- Conversion of Fuel-N into HCN and NH3 During the Pyrolysis and Gasification in Steam: A Comparative Study of Coal and BiomassEnergy & Fuels, 2007
- Formation of HCN and NH3 during coal macerals pyrolysis and gasification with CO2Fuel, 2005
- Dimensional Cold-Modeling Criteria for Fluidization QualityIndustrial & Engineering Chemistry Research, 2004
- A review of the primary measures for tar elimination in biomass gasification processesBiomass and Bioenergy, 2003
- Mineralogy and microstructure of sintered lignite coal fly ash☆Fuel, 2003
- Cold model characterisation of a fluidised bed catalytic reactor by means of instantaneous pressure measurementsChemical Engineering Journal, 2002
- Release of Fuel-Bound Nitrogen during Biomass GasificationIndustrial & Engineering Chemistry Research, 2000