Abstract
A large amount of oil-based solid waste is generated during the extraction of hydrocarbon raw materials, one well produces about 300 cubic meters, including drilling mud, spent mud, sewage flocculant and other waste. The main components are clay, drilling mud, sewage, chemical treatment reagents and waste oil, etc., which form a stable colloidal suspension system with complex harmful components. The article presents the results of the approval of the technology for the disposal of hazardous waste generated during the exploration and extraction of minerals. The algorithm included three technological processes (stages). The first stage is the collection of hazardous waste (solid drilling cuttings) followed by their disposal and production of aggregate based on drilling cuttings. Aggregate can be used as a construction material for arranging sites and roads, collapsing well flare barns, reclamation of land plots after drilling, filling and layering of solid household waste and solid industrial waste landfills. The second stage is settling, centrifugation and filtering (separation) of liquid oil-containing waste using separator SDT 1-4 and containers of 1000 m3 with further disposal of hazardous waste in the 3rd stage. After separation, filtration and settling, the obtained petroleum products (diesel fuel, lubricants) from the container can be used as a secondary resource for own needs. The third stage is the local purification of wastewater from specific pollutants (heavy metals, oil products), calcium oxide and hydroxide, humic substances, which includes the following processes: reagent flotation using the coagulant – ferric sulfate III. Purified wastewater can be used as a secondary resource. The final efficiency of this technology was approximately 95% of effective treatment of hazardous waste. У статті наведено результати апробації технології знешкодження небезпечних відходів, що утворюються під час розвідки, видобування корисних копалин. Алгоритм включав в себе три технологічні процеси (етапи). Перший етап – збирання небезпечних відходів (твердих бурових шламів) з подальшим їх знешкодженням та отриманням заповнювача на основі бурових шламів. Другий етап – відстоювання, центрифугування та фільтрування (сепарація) рідких нафтовмісних відходів із застосуванням сепаратора СДТ 1-4 та ємностей по 1000 м3 з подальшим знешкодженням небезпечних відходів на 3 етапі. Третій етап – локальне очищення стічних вод від специфічних забруднюючих речовин (важкі метали, нафтопродукти), оксиду та гідроксиду кальцію, гумінових речовин, що включає такі процеси: реагентну флотацію з використанням коагулянту – сульфату заліза ІІІ. Прикінцева ефективність даної технології складала приблизно 95% ефективного очищення небезпечних відходів.

This publication has 9 references indexed in Scilit: