A sensor for the direct measurement of curvature based on flexoelectricity
Authors:
- Xiang YanXYXiang Yan
- Wenbin HuangWHWenbin Huang
- Seol Ryung KwonSKSeol Ryung Kwon
- Shaorui YangSYShaorui Yang
- Xiaoning JiangXiaoning Jiang
- Fuh-Gwo YuanFYFuh-Gwo Yuan
- 11 July 2013
- journal article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 22 (8) , 085016
Abstract
A direct curvature sensing measurement based on the flexoelectricity of Ba0.64Sr0.36TiO3 (BST) material through electromechanical coupling is proposed and developed in this paper. The curvature sensing was demonstrated in four point bending tests of a beam with bonded BST curvature sensors under different applied loads with low time-harmonic frequencies from 0.5 to 3 Hz. A shear lag concept which describes the efficiency of the loading transfer from the epoxy bonding layer was taken into account in extracting the actual curvature from the sensor measurement. A finite element analysis has been performed to estimate the curvature transfer efficiency and the bonding layer thickness is found to be a critical parameter in determining the curvature transfer. Experimental results showed a good linearity of charge output dependence on curvature inputs in a limited frequency range and showed a curvature sensitivity of 30.78 pC m, in comparison with 32.48 pC m from theoretical predictions. Using the measured curvature, the bending stiffness of the beam was then obtained from the experimentally obtained moment–curvature curve. This work demonstrated that the flexoelectric BST sensor provides a direct curvature measurement instead of using a traditional strain gage sensor through interpolation, and thus offers an important avenue for on-line and in situ structural health monitoring.Keywords
This publication has 20 references indexed in Scilit:
- Fiber-optic curvature sensor with optimized sensitive zoneOptics & Laser Technology, 2011
- All-Fiber Curvature Sensor Based on Multimode InterferenceIEEE Photonics Technology Letters, 2011
- An introduction to structural health monitoringPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- An Analytical Approach and Optimization of Curvature GaugeJournal of Physics: Conference Series, 2006
- Monte Carlo simulation of curvature gauges by ray tracingMeasurement Science and Technology, 2004
- Alternative to strain measurementOptical Engineering, 2003
- Structural health monitoring using a fiber optic polarimetric sensor and a fiber optic curvature sensor - static and dynamic testSmart Materials and Structures, 2001
- Thin structure deflection measurementIEEE Transactions on Instrumentation and Measurement, 1999
- Curvature gauge as torsional and axial load sensorSensors and Actuators A: Physical, 1998
- Curvature gaugeSensors and Actuators A: Physical, 1995