Preparation and Properties of a Xanthoceras sorbifolium Bunge Oil-Based Adhesive for Plywood
Open Access
Abstract
Conventional adhesives for plywood are mostly derived from petroleum-based materials and commonly suffer from formaldehyde emission, posing threats to the environment and human health. In this study, a renewable resource, Xanthoceras sorbifolium Bunge oil, was used as the raw material. A high-performance bio-based adhesive was successfully prepared by synthesizing Xanthoceras sorbifolium Bunge oil dimethacrylate (MXOEA) as a reactive diluent, blending it with acrylated epoxy Xanthoceras sorbifolium Bunge oil (AEXO), and introducing 2-isocyanatoethyl methacrylate (IEM) to enhance crosslinking. The effects of the MXOEA/AEXO ratio and the IEM addition level on the properties of the adhesive and the resulting plywood were systematically investigated. The results showed that when the mass ratio of AEXO to MXOEA was 3:7, and the IEM content was 10%, the adhesive exhibited the best bonding performance: the resulting plywood achieved a modulus of rupture of 68.85 MPa, a modulus of elasticity of 8086 MPa, and dry and wet bonding strengths of 3.21 MPa and 2.32 MPa, respectively. Mechanistic analysis indicated that the introduction of IEM moderately reduced the viscosity of the adhesive system. Meanwhile, the isocyanate groups in IEM reacted with the hydroxyl groups on the wood surface, forming a chemical crosslinking structure at the adhesive-wood interface, which is considered one of the reasons for the improved mechanical properties of the plywood. This study provides a formaldehyde-free, high-performance bio-based adhesive derived from Xanthoceras sorbifolium Bunge oil for the field of wood-based composites.Keywords
Funding Information
- Capacity Building Project of the National Forestry Grassland Engineering Technology Research Center for Efficient Development and Utilization of Sandy Shrubs (BR251013)
- Natural Science Foundation of Inner Mongolia Autonomous Region (2024MS03068)
- Tianjin 729 Sports Goods Co., Ltd.
- Inner Mongolia Agricultural University (202510129026)
- Inner Mongolia Agricultural University (202510129058)
This publication has 25 references indexed in Scilit:
- Exploring bonding and interfacial adhesion properties of normal and reaction wood in wood-based composites – A reviewInternational Journal of Adhesion and Adhesives, 2025
- One-component polyurethane adhesives in timber engineering applications: A reviewInternational Journal of Adhesion and Adhesives, 2023
- Synthesis of a novel biodegradable curing agent modified by castor oil for polyacrylate adhesive applicationsJournal of Applied Polymer Science, 2023
- Recent progresses in wood-plastic composites: Pre-processing treatments, manufacturing techniques, recyclability and eco-friendly assessmentCleaner Engineering and Technology, 2022
- Biocomposites from bamboo fibers and palm oil-based thermosets: Effects of natural phenolic cross-linkersComposites Communications, 2020
- Reinforced biobased adhesive for eco-friendly sandwich panelsInternational Journal of Adhesion and Adhesives, 2020
- Recent progresses of fabrication and characterization of fibers-reinforced composites: A reviewComposites Communications, 2019
- Polyurethanes for coatings and adhesives – chemistry and applicationsPolymer International, 2018
- Improvement of properties for biobased composites from modified soybean oil and hemp fibers: Dual role of diisocyanateComposites Part A: Applied Science and Manufacturing, 2016
- Effects of moisture content on formaldehyde emission and mechanical properties of plywoodBuilding and Environment, 2006