Abstract
Those who need a better vacuum, either in existing systems or for new construction, should be interested in this discussion, since there is at present no method of analysis to predict the bake time and temperature required to achieve a specific low outgassing rate from stainless steel. It has been known for a generation that atomic hydrogen can be baked out of stainless steel to achieve an outgassing rate of 10−12 Torr ℓ/(s cm2). The time and temperature required are in reasonable agreement with measured diffusion constants and diffusion theory. However, the diffusion theory completely fails when predicting lower outgassing rates. The time and temperature required greatly exceed those predicted. It was observed two generations ago that at low pressures the permeation of hydrogen through metals is no longer a function of the square root of pressure, but approaches zero. This has been attributed to surface effects, specifically including the recombination limit; the atomic hydrogen outgassed to the surface must recombine into molecular hydrogen before it can escape into the vacuum. The recombination rate is a function of the square of the surface coverage by atomic hydrogen. The concentration at the surface cannot be zero as assumed in conventional diffusion theory, but must remain at finite levels consistent with the outgassing rate. In this article a finite-difference analysis is made of a reported 2 h bake at 950 °C; the diffusion of hydrogen to the surface is modified to include a recombination limit. The outgassing rates with time are found together with the concentration profiles in the steel. The recombination coefficient is adjusted to match the observed postbake outgassing rate. It is concluded that the addition of the recombination limit to diffusion theory may be a viable analysis method to predict the results of specific time and temperature bake patterns.