Correlation with the Microstructure and Synergistic Physiochemical Etching Resistance of Nanocomposites under Fluorine-Containing Plasma Conditions
- 13 September 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (38) , 43771-43782
Abstract
In the semiconductor fabrication industry, high-power plasma is indispensable to obtain a high aspect ratio of chips. For applications to ceramic components including the dielectric window and ring in the semiconductor etching chamber, the Y2O3 ceramics have attracted interest recently based on excellent erosion resistance. When a high bias voltage is applied in a plasma environment containing fluorine gas, both chemical etching and ion bombardment act simultaneously on the ceramic components. During this etching process, severe erosion and particles generated on the ceramic surface can have effects on overall equipment effectiveness. Herein, we report the outstanding plasma etching resistance of Y2O3-MgO nanocomposite ceramics under a CF4/Ar/O2 gas atmosphere; the erosion depth of this material is 40-79% of that of the reference materials, Y2O3 ceramics. In a robust approach involving effective control of the microstructure with different initial particles and sintering conditions, it is possible to understand the relationship between etching behavior and microstructure evolution of the nanocomposite ceramic. The results indicate that the nanocomposite with fine and homogeneous domain distribution can decrease particle generation and ameliorate its life cycle; accordingly, this is a promising alternative candidate material for ceramic components in plasma chambers.Keywords
Funding Information
- National Research Foundation of Korea (2020M3H4A3106003)
- Ministry of Trade, Industry and Energy (20015942)
This publication has 38 references indexed in Scilit:
- Phase Homogeneity in Y 2 O 3 – MgO Nanocomposites Synthesized by Thermal Decomposition of Nitrate Precursors with Ammonium Acetate AdditionsJournal of the American Ceramic Society, 2011
- A chemical solution approach for superconducting and hard epitaxial NbC filmChemical Communications, 2010
- Effects of artificial pores and purity on the erosion behaviors of polycrystalline Al2O3 ceramics under fluorine plasmaJournal of the Ceramic Society of Japan, 2009
- Reduction of Particle Contamination in Plasma-Etching Equipment by Dehydration of Chamber WallJapanese Journal of Applied Physics, 2008
- CHF3–O2 reactive ion etching of 4H-SiC and the role of oxygenMicroelectronic Engineering, 2006
- Nanocrystalline scandia-doped zirconia (ScSZ) powders prepared by a glycine–nitrate solution combustion routeJournal of the European Ceramic Society, 2005
- Comparison of plasma etch chemistries for MgOApplied Surface Science, 2001
- Reactive Ion Etching of PECVD Amorphous Silicon and Silicon Nitride Thin Films with Fluorocarbon GasesJournal of the Electrochemical Society, 1990
- Lineal Intercept Technique for Measuring Grain Size in Two‐Phase Polycrystalline CeramicsJournal of the American Ceramic Society, 1972
- Average Grain Size in Polycrystalline CeramicsJournal of the American Ceramic Society, 1969