Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components
Authors:
- 1 July 2015
- journal article
- research article
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 23 (6) , 427-434
Abstract
Enhancement of mechanical and wear-resistant properties of polymer composites is important because they are widely used in tribological environments. The properties can be enhanced by reinforcement with particulates in the polymer matrix. Nylon is used in many engineering applications, and silica fume is used as a filler material in civil-oriented applications. In this paper, the properties of Nylon 66 reinforced with silica fume particulates are investigated. The reinforcement by silica fume at 5%, 10%, 15%, 20% and 25% weight fraction is considered. Nylon 66 and silica fume were compounded in a twin screw extruder and the test samples were produced in 60 ton L&T injection moulding machine. Heat distortion temperature (HDT), tensile, flexural, compression and impact strength tests were carried out in accordance with ASTM standards. The test results confirmed the improved mechanical and HDT properties of the Nylon 66-silica fume composites. Observations made using scanning electron microscopy revealed good physical adhesion and uniform dispersion of silica fumes in the Nylon 66.Keywords
This publication has 18 references indexed in Scilit:
- Effect of fly ash and silica fume on compressive strength of self-compacting concrete under different curing conditionsAin Shams Engineering Journal, 2011
- Mechanical Strength and Durability Properties of High Performance Mortar Containing Densified Silica FumeAmerican Journal of Applied Sciences, 2011
- Tribological Performance of PTFE Bronze Filled Composites under Wide Range of Application ConditionsJournal of Reinforced Plastics and Composites, 2009
- Comparison of tribological behavior of nylon composites filled with zinc oxide particles and whiskersWear, 2009
- Mechanical properties of iron powder filled high density polyethylene compositesMaterials & Design (1980-2015), 2007
- Effect of Short Fibre Reinforcement on the Friction and Wear Behaviour of Nylon 66Applied Composite Materials, 2005
- Influence of Filler Addition on the Mechanical Properties of Nylon-6 PolymerJournal of Reinforced Plastics and Composites, 2004
- Conducting polymer composites of zinc‐filled nylon 6Journal of Applied Polymer Science, 2001
- Conducting aluminum‐filled nylon 6 compositesPolymer Composites, 2001
- The role of copper compounds as fillers in transfer film formation and wear of nylonWear, 1992