A Study on the Evolution Laws of Entrainment Performances Using Different Mixer Structures of Ejectors
Open Access
Abstract
Being the core of the ejector refrigeration system, an ejector with a suitable mixer, conical–cylindrical or cylindrical, is key to high-energy-efficiency and low-carbon systems. To promote the scientific selection of mixers for ejectors based on the theoretical models that have been validated by experiments, the evolution laws of the entrainment ratios in the two types of ejectors are studied under various operating conditions. Furthermore, the influence mechanism of the mixer structures on the entrainment ratio of the ejector is elucidated by comparing the distribution characteristics of the entropy generation rate, pressure lift proportion, and entropy generation rate of the per-unit pressure lift in the two types of ejectors. The efficiencies of the conical-cylindrical mixer ejector and cylindrical mixer ejector exist a crossover, which makes the entrainment ratio of the conical–cylindrical mixer ejector smaller under small compression ratios but larger under large compression ratios. By changing the cylindrical mixer into a conical one, on the one hand, more pressure rise will be distributed in the diffuser, which helps to reduce the entropy increase rate in the pressurization process; on the other hand, the wall impulse effect of the conical mixer will lead to an increase in entropy generation rate of per-unit pressure lift, resulting in a growing entropy generation rate of boosting. The dominant roles are not the same with changing compression ratios, which leads to different relationships of entrainment ratio between the cylindrical and conical mixer ejectors.Keywords
Funding Information
- Guangxi Natural Science Foundation (2022GXNSFBA035512, 2023KY0825)
- Project for Enhancing Young and Middle-aged Teacherʹs Research Basis Ability in Colleges of Guangxi (2022GXNSFBA035512, 2023KY0825)
This publication has 41 references indexed in Scilit:
- A full operating conditions ejector model for refrigeration systems driven by low-grade heat sourcesCase Studies in Thermal Engineering, 2024
- Experimental comparison of critical performance for variable geometry ejectors with different mixer structuresChemical Engineering Journal, 2023
- Investigation on improvement potential of steam ejector performance in refrigeration cycle via constant rate of momentum change design methodApplied Thermal Engineering, 2023
- Numerical study on the effect of superheat on the steam ejector internal flow and entropy generation for MED-TVC desalination systemDesalination, 2022
- Performance analysis of an ejector-assisted two-stage evaporation single-stage vapor-compression cycleApplied Thermal Engineering, 2022
- Analysis on the optimal mixing pressure and efficiency limit of an ideal ejectorEnergy Reports, 2021
- Energy-saving diagnosis model of central air-conditioning refrigeration system in large shopping mallEnergy Reports, 2021
- Thermodynamic analysis of the steam ejector for desalination applicationsApplied Thermal Engineering, 2019
- Numerical investigation of geometry parameters for design of high performance ejectorsApplied Thermal Engineering, 2009
- Shock circle model for ejector performance evaluationEnergy Conversion and Management, 2007