Single-Side Fabricated p+Si/Al Thermopile-Based Gas Flow Sensor for IC-Foundry-Compatible, High-Yield, and Low-Cost Volume Manufacturing
- 13 November 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (1) , 821-824
Abstract
In this brief, a low-cost and high-yield bulk under thin-film (BUT) MEMS technique for the volume production of flow sensors is proposed and developed. The IC-foundry-compatible process is conducted only from the front side of (111) silicon wafers, without double-sided alignment exposure, wafer bonding, cavity silicon on insulator, and double-sided polished wafers needed. With the single-wafer-based BUT structure, the thermopile consisting of 21 pairs of single-crystalline Si/Al thermocouples that show significantly higher Seebeck coefficient and lower noise compared to the traditional poly-Si/Al thermocouples is employed to construct the gas flow sensor, and the fabricated sensor chip size is as small as 0.65 mm×0.65 mm that facilitates low-cost high-throughput IC-foundry batch fabrication. The fabricated sensor shows a high normalized sensitivity of 199 μV/(SLM)/mW for nitrogen gas flow, which is 1 order of magnitude higher than that of the reported thermopile-based gas flow sensor, and a short response time of 3.5 ms could be achieved. With the new technique, the proposed sensors are promising in automotive and process control system applications.Keywords
Funding Information
- National Natural Science Foundation of China (61674160, 51505273, 91323304)
- Ministry of Science and Technology of China (2016YFA0200800)
This publication has 10 references indexed in Scilit:
- Light emission from a poly-silicon device with carrier injection engineeringMaterials Science and Engineering: B, 2018
- Si light-emitting device in integrated photonic CMOS ICsOptical Materials, 2017
- Package-friendly piezoresistive pressure sensors with on-chip integrated packaging-stress-suppressed suspension (PS3) technologyJournal of Micromechanics and Microengineering, 2013
- A single chip, double channel thermal flow meterMicrosystem Technologies, 2008
- Multipurpose MEMS thermal sensor based on thermopilesSensors and Actuators A: Physical, 2008
- Fabrication of Thermoelectric Sensor Using Silicon-on-Insulator StructureJapanese Journal of Applied Physics, 2007
- A high-temperature thermopile fabrication process for thermal flow sensorsSensors and Actuators A: Physical, 2006
- Microarrays of silicon-based light emitters for novel biosensor and lab-on-a-chip applicationsOptical Materials, 2005
- Silicon anisotropic etching without attacking aluminum with Si and oxidizing agent dissolved in TMAH solutionSensors and Actuators A: Physical, 2004
- Multipurpose thermal sensor based on Seebeck effect2003