A parametric study on fatigue strength of spot‐weld joints
Authors:
- 1 September 2008
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 31 (9) , 766-776
Abstract
Fastening elements usually lead to high stress concentrations; fatigue failure thus becomes the most critical failure mode for a fastening element itself or the region around it under fluctuating stresses. A designer should seek the ways of increasing fatigue strength of a joint to ensure the safety of the whole structure.Resistance spot welding is the most preferred method to join metal sheets. The design variables for spot‐weld joints affecting their strengths are basically sheet thickness, spot‐weld nugget diameter, number of spot welds and the joint type as exemplified in tensile shear (TS), modified tensile shear (MTS), coach peel (CP) and modified coach peel (MCP) specimens.In this study, the effects of these parameters on the fatigue life of spot‐weld joints have been investigated. For this purpose, one of the most reliable fatigue assessment models, Coffin–Manson approach, was used. In order to accurately determine the stress and strain states, a nonlinear finite element analysis was carried out taking into account plastic deformations, residual stresses developed after unloading and contacting surfaces. The results provide designers with some guidelines to foresee the impact of design changes on fatigue strength of spot‐weld joints.Keywords
This publication has 17 references indexed in Scilit:
- An evaluation of simplified finite element models for spot-welded jointsFinite Elements in Analysis and Design, 2004
- Fatigue life duration prediction for welded spots by volumetric methodInternational Journal of Fatigue, 2004
- Spot welds fatigue life prediction with cyclic strain rangeInternational Journal of Fatigue, 2002
- A spot weld finite element for structural modellingInternational Journal of Fatigue, 2000
- Evaluation of multiaxial spot weld fatigue parameters for proportional loadingInternational Journal of Fatigue, 2000
- Three-dimensional finite element analysis of the mechanical behavior of spot weldsFinite Elements in Analysis and Design, 2000
- A CRACK GROWTH APPROACH TO LIFE PREDICTION OF SPOT‐WELDED LAP JOINTSFatigue & Fracture of Engineering Materials & Structures, 1998
- Fatigue strength of spot welded stainless sheet steels exposed to 3% NaCl solutionInternational Journal of Fatigue, 1998
- FATIGUE LIFE ESTIMATION IN RESISTANCE SPOT WELDS: INITIATION AND EARLY GROWTH PHASEFatigue & Fracture of Engineering Materials & Structures, 1992
- Fatigue of spot-welded lap jointsInternational Journal of Fatigue, 1984