The Development of a Fretting Fatigue Experiment with Well-Defined Characteristics
Authors:
- 1 January 1992
- book chapter
- Published by ASTM International
- p. 69-84
Abstract
It is shown that many of the unknowns present in a rotating-bending fretting fatigue experiment, fitted with a clamped bridge arrangement, may be avoided by moving to an entirely different geometry, based on a standard uniaxial tensile test specimen. A pair of cylinders is pressed against this specimen, producing a Hertzian contact, and a shear force is developed by impeding axial displacement. The apparatus is run in the partial-slip regime so that the relative displacement within the contact may be calculated. The well-defined geometry permits a rigorous analysis of contact pressure, shear traction distribution, interior stress fields, and crack tip stress intensity factors for any cracks present. Explicit equations for these quantities are developed which enable the physical parameters responsible for crack initiation, development, and early propagation to be readily obtained. Refinements to the classical contact calculations include analysis of the effects of using elastically dissimilar contacting elements, the influence of the thickness of the specimen, and the effect of surface roughness on the contact pressure and the interior stress field. A size effect discovered using this apparatus described is also reported.Keywords
This publication has 21 references indexed in Scilit:
- Contact of dissimilar elastic cylinders under normal and tangential loadingJournal of the Mechanics and Physics of Solids, 1988
- Contact problems incorporating elastic layersInternational Journal of Solids and Structures, 1988
- Paper II(ii) Surface fatigue considerations in fretting1987
- Mechanics of fretting fatigue testsInternational Journal of Mechanical Sciences, 1987
- An analysis of fretting cracks—II. Unloading and reloading phasesInternational Journal of Solids and Structures, 1986
- An analysis of fretting fatigue cracks during loading phaseInternational Journal of Solids and Structures, 1985
- Numerical solution of singular integral equations1973
- Stress concentration at a sharp edge in contact problemsJournal of Elasticity, 1972
- Adhesive or frictionless compression of an elastic rectangle between two identical elastic half-spacesInternational Journal of Engineering Science, 1969
- Interaction between an edge dislocation and a circular inclusionJournal of the Mechanics and Physics of Solids, 1964