Poly(ethylene carbonate)‐based electrolytes with high concentration Li salt for all‐solid‐state lithium batteries
Authors:
- 2 April 2018
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 37 (6) , 488-496
Abstract
High‐performance solid polymer electrolyte (SPE) has long been desired for the next‐generation high energy density and safe rechargeable lithium batteries. A SPE composed of 80 wt% lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), 20% poly(ethylene carbonate) (PEC) and a polyamide (PA) fiber membrane backbone was prepared by solution‐casting method. This solid electrolyte exhibits quite high ionic conductivity and lithium ion transference number ( t + ), and excellent mechanical strength. The as‐prepared solid electrolyte shows good wettability to porous electrodes during cycles, which is beneficial to form ionically conductive phase throughout porous electrodes. All‐solid‐state LiFePO 4 |Li cells assembled with the as‐prepared solid electrolyte deliver a high initial discharge specific capacity of 125.7 mAh·g −1 and good cycling stability at 55 °C (93.4% retention at 1C after 200 cycles), and superior cycle performance. Outstanding electrochemical performance can be mainly ascribed to the improved ionic conductivity in the entire porous electrodes due to the good wettability of SPE.Keywords
Funding Information
- National Key Research and Development Program of China (2015CB932500)
- Natural Scientific Foundation of China (51532002)
- National Basic Research Program of China (2015CB932500)
This publication has 44 references indexed in Scilit:
- Solid polymer electrolyte coating from a bifunctional monomer for three-dimensional microbattery applicationsJournal of Power Sources, 2013
- Carbon‐Nanotube‐Decorated Nano‐LiFePO4 @C Cathode Material with Superior High‐Rate and Low‐Temperature Performances for Lithium‐Ion BatteriesAdvanced Energy Materials, 2013
- Composite Poly(ethylene oxide) Electrolytes Plasticized by N‐Alkyl‐N‐butylpyrrolidinium Bis(trifluoromethanesulfonyl)imide for Lithium BatteriesChemSusChem, 2013
- Sol–gel synthesis and electrochemical properties of 9LiFePO4·Li3V2(PO4)3/C composite cathode material for lithium ion batteriesElectrochimica Acta, 2012
- Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase controlNature Nanotechnology, 2012
- Block Copolymer Solid Battery Electrolyte with High Li-Ion Transference NumberJournal of the Electrochemical Society, 2010
- High-energy cathode material for long-life and safe lithium batteriesNature Materials, 2009
- Characterization of solid polymer electrolytes based on poly(trimethylenecarbonate) and lithium tetrafluoroborateElectrochimica Acta, 2004
- Effect of modified SiO2 on the properties of PEO-based polymer electrolytesSolid State Ionics, 2003
- Electrochemical measurement of transference numbers in polymer electrolytesPolymer, 1987