On using converging shock waves for pressure amplification in shock tubes
Authors:
Open Access
- 22 April 2020
- journal article
- research article
- Published by IOP Publishing in Metrologia
- Vol. 57 (3) , 035008
Abstract
While conventional shock tubes have a distinct advantage in dynamic calibration methods due to their inherent capability to generate pressure pulses of desired amplitude and fast rise time, they are limited to the lower levels of the pressure amplitude realization range (≤7 MPa). With the increasing need for a traceable dynamic calibration standard across wider pressure ranges, a novel technique using converging shock waves is demonstrated in this work that pushes the upper limit of the standard shock tube into the medium-high pressure range. The experiments are conducted in the shock tube facility equipped with a test section that smoothly transforms the incident plane shock into a spherical shock wave that converges, accelerates and thereby amplifies its strength many folds. The experimentally recorded pressure traces are compared with numerical simulations performed by an in-house code. Using this technique, pressure pulses with peak amplitudes in the range of 30–40 MPa, with < 3.4% uncertainty based on numerical reference profile, were realized in the test section with nominal usage of resources.Keywords
Funding Information
- European Association of National Metrology Institutes
This publication has 20 references indexed in Scilit:
- Past Developments and Current Advancements in Unsteady Pressure Measurements in TurbomachinesJournal of Turbomachinery, 2018
- Towards a standard for the dynamic measurement of pressure based on laser absorption spectroscopyMetrologia, 2016
- Novel method for estimating the dynamic characteristics of pressure sensor in shock tube calibration testReview of Scientific Instruments, 2015
- Towards a shock tube method for the dynamic calibration of pressure sensorsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2014
- Dynamic calibration method of high-pressure transducer based on quasi-δ function excitation sourceMeasurement, 2012
- Frequency analysis of a step dynamic pressure calibratorReview of Scientific Instruments, 2012
- Design, calibration and error analysis of a piezoelectric thrust dynamometer for small thrust liquid pulsed rocket enginesMeasurement, 2011
- Toward dynamic force calibrationMeasurement, 2009
- Knocking Cylinder Pressure Data Characteristics in a Spark-Ignition EngineJournal of Engineering for Gas Turbines and Power, 2003
- Digital compensation of pressure sensors in the time domainExperiments in Fluids, 2002