The Impact of Shearing and Flexibility of Cultivator Tines on the Vertical Forces Value
Open Access
- 1 July 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in Agricultural Engineering
- Vol. 22 (2) , 69-78
Abstract
The paper presents the outcomes of the research on the impact of shearing depth and flexibility of cultivator tines with cultivator points on the value of vertical forces acting thereon. The object of the research consisted in “S” tines with the flexibility coefficient of 0.0061; 0.0711; 0.0953 and 0.1406 m∙kN−1. The investigations were carried out in field conditions in sandy clay soil with moisture of 11.2%. The forces were measured for the assumed shearing depths which were 5, 9 and 13 cm at the shearing speed of 3 m∙s−1. A stand for measurement of forces acting on soil shearing tools in the field conditions was used. It was found out that the increase of the shearing depth causes a linear increase of the vertical force, but the force gradient decreases with the growth of the tine flexibility. Moreover, it was found out that the increase of the tine flexibility at the beginning causes the increase and then the decrease of the vertical force regardless the shearing depth. The impact of flexibility on the vertical force value was described with the parabola equation. The tines flexibility, at which the highest value of vertical force may be expected, grows with the reduction of the shearing depth.Keywords
This publication has 13 references indexed in Scilit:
- Duckfoot tools connected with flexible and stiff tines: Three components of resistances and soil disturbanceSoil and Tillage Research, 2016
- Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modellingInformation Processing in Agriculture, 2015
- Estimating the variability of tillage forces on a chisel plough shank by modeling the variability of tillage system parametersComputers and Electronics in Agriculture, 2011
- Possibilities of carbon and nitrogen sequestration under conventional tillage and no-till cover crop farming (Mekong valley, Laos)Agriculture, Ecosystems & Environment, 2010
- Vibrating Tillage Tools2009
- A review of the effect of implement geometry on soil failure and implement forcesSoil and Tillage Research, 2007
- Interaction between soil and a wide cutting blade using the discrete element methodSoil and Tillage Research, 2007
- Tine forces established by a two-level model and the draught requirement of rigid and flexible tinesSoil and Tillage Research, 2006
- Short-term tillage effects on soil cone index and plant development in a poorly drained, heavy clay soilSoil and Tillage Research, 2005
- Effect of soil compaction and water content on the resulting forces acting on three seed drill furrow openersSoil and Tillage Research, 2005