Optimization and modelling of Pb (II) and Cu (II) adsorption onto red algae (Gracilaria changii)-based activated carbon by using response surface methodology
Open Access
- 17 April 2023
- journal article
- research article
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (15) , 16799-16818
Abstract
Activated carbon obtained from red algae Gracilaria changii was used as an adsorbent to remove Pb (II) and Cu (II) from an aqueous solution. The raw red algae were first impregnated with phosphoric acid, followed by thermal activation. The Box–Behnken design was used to optimize the activation process. The optimum activation parameters were 84%, 650 °C, and 175 min for acid concentration, activation temperature, and activation time, respectively. The obtained activated carbon had a high surface area of 867 m2/g. The removal of Pb (II) and Cu (II) was evaluated using a batch adsorption study. The effect of solution pH on the removal of metal ions was investigated within the range of 2–7. The effect of three important adsorption parameters (initial metal ion concentration, adsorbent dosage, and contact time) was analyzed using central composite design. The optimum removal of Pb (II) and Cu (II) was 76% and 36%, respectively. The adsorption kinetics obeyed the pseudo-second-order model, while the adsorption isotherm obeyed the Langmuir model.Keywords
Funding Information
- Lulea University of Technology
This publication has 79 references indexed in Scilit:
- Cadmium removal from aqueous solution using microwaved olive stone activated carbonJournal of Environmental Chemical Engineering, 2013
- Competitive biosorption of lead, cadmium, copper, and arsenic ions using algaeEnvironmental Science and Pollution Research, 2012
- Pb(II) and Cd(II) Removal from Aqueous Solutions Using Activated Carbon Developed from Coffee Residue Activated with Phosphoric Acid and Zinc ChlorideJournal of Chemical & Engineering Data, 2011
- Characterization and lead adsorption properties of activated carbons prepared from cotton stalk by one-step H3PO4 activationJournal of Hazardous Materials, 2010
- Heavy metals, occurrence and toxicity for plants: a reviewEnvironmental Chemistry Letters, 2010
- Optimization of basic dye removal by oil palm fibre-based activated carbon using response surface methodologyJournal of Hazardous Materials, 2008
- Comparative study of biosorption of heavy metals using different types of algaeBioresource Technology, 2007
- Biosorption of Cu2+, Cd2+, Pb2+, and Zn2+ using dried marine green macroalga Caulerpa lentilliferaBioresource Technology, 2006
- Removal of lead(II) by adsorption using treated granular activated carbon: Batch and column studiesJournal of Hazardous Materials, 2005
- A review of potentially low-cost sorbents for heavy metalsWater Research, 1999