Study of amorphous lithium silicate thin films grown by atomic layer deposition
- 27 September 2011
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 30 (1) , 01A106
Abstract
Lithium silicate thin films, which are interesting materials for example in lithium ion batteries, were grown by the atomic layer deposition technique from lithium hexamethyldisilazide [LiHMDS, Li(N(SiMe3)2)] and ozone precursors. Films were obtained at a wide deposition temperature range between 150 and 400 °C. All the films were amorphous except at 400 °C, where partial decomposition of LiHMDS was also observed. The growth behavior was examined in detail at 250 °C, and saturation of growth rates and refractive indices with precursor doses was confirmed, thereby verifying self-limiting surface reactions. Likewise, the linear thickness dependence of the films with the number of deposition cycles was verified. Strong dependence of growth rate and film composition on deposition temperature was also seen. Overall, the amorphous films grown at 250 °C had a stoichiometry close to lithium metasilicate (Li2.0SiO2.9) with 0.7 at. % carbon and 4.6 at. % hydrogen impurities. The corresponding growth rate and refractive index (n580) were 0.8 Å/cycle and about 1.55.Keywords
This publication has 23 references indexed in Scilit:
- Hydrothermally Processed Oxide Nanostructures and Their Lithium–ion Storage PropertiesDiscover Nano, 2010
- Lanthanum titanate and lithium lanthanum titanate thin films grown by atomic layer depositionJournal of Materials Chemistry, 2010
- Materials issues in fusion reactorsJournal of Physics: Conference Series, 2010
- Atomic layer deposition of lithium containing thin filmsJournal of Materials Chemistry, 2009
- Fabrication and ionic conductivity of Li2SiO3 thin filmSolid State Ionics, 2009
- Fabrication and ionic conductivity of amorphous lithium meta-silicate thin filmSolid State Ionics, 2008
- Improvement of High-Rate Performance of All-Solid-State Lithium Secondary Batteries Using LiCoO[sub 2] Coated with Li[sub 2]O–SiO[sub 2] GlassesElectrochemical and Solid-State Letters, 2008
- Lithium silicate based membranes for high temperature CO2 separationJournal of Membrane Science, 2007
- Carbon Dioxide Gas Sensor with Li2TiSiO5 Solid Electrolyte and NiO-Li2CO3 as Sensing ElectrodeJournal of the Ceramic Society of Japan, 2003
- Atomic layer deposition2002