Solid State Recycling of Vanadis®8 Steel Scraps Using Powder Metallurgy
Open Access
- 1 January 2023
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26, e20230204
Abstract
Vanadis®8 is a high-value tool steel, that undergoes gas atomization and hot isostatic pressing during production , resulting in costly waste. Repurposing this waste material through powder metallurgy (PM) offers a cost-effective solution. This study explores the PM process applied to Vanadis®8 steel scraps, involving high energy ball milling, uniaxial pressing, and sintering. The final product and the as-received steel underwent heat treatments, including quenching and tempering. Microstructural evaluation employed X-ray diffraction and scanning electron microscopy, while physical evaluation entailed Archimedes density measurements. Mechanical analysis was carried out through microhardness and compression strength tests. Results revealed that optimal milling conditions were achieved at 30 hours with 400 rpm (s-1). Vanadis®8 steel produced through PM attained 85% densification compared to the as-received material (6.31 g/cm3). MC-type carbides were present in all evaluated conditions. Heat treatments improved mechanical values for all conditions, suggesting that PM-produced Vanadis®8 steel, subjected to quenching and tempering, presents a viable reuse option.Keywords
This publication has 29 references indexed in Scilit:
- Effect of High Energy Milling Time of the Aluminum Bronze Alloy Obtained by Powder Metallurgy with Niobium Carbide AdditionMaterials Research, 2017
- Microstructures and Mechanical Properties of TaC Added to Vanadis 4 Tool Steel through Vacuum Sintering and Heat TreatmentsISIJ International, 2017
- Study of Al composites prepared by high-energy ball milling; Effect of processing conditionsJournal of Alloys and Compounds, 2015
- Thermal Fatigue Influence of Laser Treated Tool Steel SurfaceProcedia Engineering, 2014
- Fabrication and characterization of nanostructured Ti6Al4V powder from machining scrapsAdvanced Powder Technology, 2010
- The effect of milling speed on the structural properties of mechanically alloyed Fe–45%Ni powdersJournal of Alloys and Compounds, 2009
- High-Speed Steels Produced by Conventional Casting, Spray Forming and Powder MetallurgyMaterials Science Forum, 2005
- Light emission, chip morphology, and burr formation in drilling the bulk metallic glassInternational Journal of Machine Tools and Manufacture, 2005
- Mechanical alloying and millingProgress in Materials Science, 2001
- Scherrer after sixty years: A survey and some new results in the determination of crystallite sizeJournal of Applied Crystallography, 1978