InAlAs–InGaAs Double-Gate HEMTs on Transferred Substrate
Authors:
- 1 June 2004
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 25 (6) , 354-356
Abstract
We report the fabrication and the dc characterization of the first In/sub 0.52/Al/sub 0.48/As-In/sub 0.53/Ga/sub 0.47/As long double-gate (DG) high-electron mobility transistors (HEMTs). These devices have been obtained using a transferred substrate technique. Although the layer structure has not been optimized, a maximum extrinsic transconductance gm of 450 mS/mm is obtained. At the same bias voltage, the drain current I/sub d/ is 120 mA/mm, which gives a large ratio gm/I/sub d/ of 3.8 V/sup -/, indicating the improvement of the charge control efficiency due to the DG structure.Keywords
This publication has 8 references indexed in Scilit:
- Frontiers of silicon-on-insulatorJournal of Applied Physics, 2003
- Pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As HEMTs with an ultrahigh f/sub T/ of 562 GHzIEEE Electron Device Letters, 2002
- Pt-based gate enhancement-mode InAlAs/InGaAs HEMTs for large-scale integration2002
- Design and realization of sub 100 nm gate length HEMTs2002
- Fabrication technology and device performance of sub-50-nm-gate InP-based HEMTs2002
- 0.12 μm transferred-substrate In/sub 0.52/Al/sub 0.48/As/In/sub 0.53/Ga/sub 0.47/As HEMTs on silicon waferIEEE Electron Device Letters, 2002
- Submicron scaling of HBTsIEEE Transactions on Electron Devices, 2001
- High-performance submicrometer AlInAs-GaInAs HEMT'sIEEE Electron Device Letters, 1988